Plumbing

Hose tail with 120 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 120° Tails are suited to the ...

Ideal connector when different sized hoses need to be connected. Up to 3 different size Aquavalve tails can be screwed in to suit hose size and in...

Hose tail with 90 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 90° fittings are suited to the...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI & Burea...

Bronze Ball Valves BSP Threads. Bronze body with stainless ball and nylon liner. Available in multiple sizes. These genuine bronze ball valves are ...

Stainless Steel square front basin. Ideal for the home, shed, workshop, RV or boat. DIMENSIONS:Protrusion from wall: 355mmWidth: 350mmSplash Guard ...

Blakes traditional bronze seacocks. Manufactured from the highest specification marine grade bronze. - Unique built-in grease nipples to allow in-w...

Brass Name Plates to label deck fillers. Text available in either Diesel or Water

Cockpit drain 38mm with hose tail attachment. This cockpit drain is easily installed in the same way as a skin fitting and has a hose tail for a di...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Chrome plated bronze deck filler caps. To suit Mecca deck fillers.Made in New Zealand. Available in 1-1/4" (32mm) and 1-1/2" (38mm) BSP Thread sizes.

Black Glass Reinforced Nylon for high strength and durability. Labelled either "DIESEL", "WATER", or "PETROL". Accepts 38mm or 50mm (2") ID Hose.

Bronze elbows 90 degree with female/female BSP threads. Multiple sizes available.

A traditional brass bilge pump with no nonsense dependability and construction. The heavy gauge 1 1/2" brass tube allows for smooth operation with ...

Service kit for Fynspray WS280 bilge pumps. Available to order, contact store via orders@harken.co.nz or 09 3033 744

An elegant top of the line pump with traditional styling and solid brass casting, featured as The Proper Pump in Mates book "The Finely Fitted Yach...

A popular rocker action pump which has become a standard around the world. Made in NZ by Fynspray for almost twenty years, it can be used with eith...

Service kits for Fynspray Galley Pumps. Kits for all models available Available to order, contact store via orders@harken.co.nz or 09 3033 744

High quality all brass construction makes this swiveling spout the perfect addition to your foot pump system. Rugged and long lasting, available in...

Fynspray Sink Waste and plug fittings. Available in white nylon or chrome plated brass finish. The smaller size makes these ideal for sinks and was...

Conversion kit for Fynspray WS62 galley pump. Converts the pump to use the newer nitrile washers for longer times between services. Available to or...

High quality NZ Made Fynspray galley pump. Double action. Takes up little space. Very reliable. Chromed brass spout for salt or fresh water usage. ...

"In Boating circles there is a truism, that the most efficient bilge pump in the world is a frightened sailor wielding a bucket. Most times boating...

HANSEN METEOR BILGE PUMP - OVERHAUL KIT INCLUDES:•1 x Diaphragm•2pcs Diaphragm clamps•1 x Door Gasket•2 x Flapper valves•S/S Fastener kit Available...

Service Kit for Hansen Meteor Bilge Pump. Includes *1 x BPS/2S Diaphragm *1 x BPT/5 Door Gasket *2 x BPT/4 Flapper Valves Available to order, conta...

Henderson Mk5 Manual Bilge Pump This is a versatile bilge, waste, or water transfer pump in a lightweight but robust construction of tough plastic....

Bronze BSP threaded Hex Nipple with external thread. For joining pipes and fittings of the same diameter. Available in multiple thread sizes.

Bronze BSP threaded hex plug. For blanking of plumbing pipes and fittings. Available in multiple sizes.

Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.

Small stainless steel clamshell vent. Ideal as an attractive covering for anchor locker drains or tank vents. Available in three sizes: SMALL - Wid...

Homer Compartment Drain Hood 316 Stainless steel with nylon thread. Length can be adjusted. Perfect for anchor wells. Thread size: 19mm (3/4") We...

Homer 38mm Pipe Deck Filler cast in 316 Stainless Steel. Available with "Water" "Waste" or "Diesel" label. Fits 38mm hose. Flange Diameter: 75mm ...

Homer Straight Tank Vent Flush mount with cup. Marine Grade 316 Stainless Steel. Available in two hose sizes.

Homer Round Head Fuel Tank Vent 316 Stainless steel.

Tank Vent 12.7mm 1/2" for fuel or water tank. 316 grade Stainless Steel. Thread: 1/2" BSP Fits: 1/2" hose Tail Length: 30mm Max panel thickness: 16mm

Homer Tank Vent 316 stainless steel with stainless steel screen. May be used as either a fuel or water tank vent. Thread: 19mm Hose Size: 10MM (3/...

Homer Water Tank Vent 316 Stainless Steel. Round Head with fully threaded tail. BSP thread.

Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...

Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...

Tail Long Thread 120° TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the mat...

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-rei...

TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides d...

Bronze Hose tails with BSP threads. Available in multiple sizes.

Bronze Hose Tail Elbows with male BSP threads. Available in multiple sizes.