Plumbing

Hose tail with 90 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 90° fittings are suited to the...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

Bronze Ball Valves BSP Threads. Bronze body with stainless ball and nylon liner. Available in multiple sizes. These genuine bronze ball valves are ...

Chrome plated bronze deck filler caps. To suit Mecca deck fillers.Made in New Zealand. Available in 1-1/4" (32mm) and 1-1/2" (38mm) BSP Thread sizes.

Bronze elbows 90 degree with female/female BSP threads. Multiple sizes available.

A traditional brass bilge pump with no nonsense dependability and construction. The heavy gauge 1 1/2" brass tube allows for smooth operation with ...

An elegant top of the line pump with traditional styling and solid brass casting, featured as The Proper Pump in Mates book "The Finely Fitted Yach...

"In Boating circles there is a truism, that the most efficient bilge pump in the world is a frightened sailor wielding a bucket. Most times boating...

HANSEN METEOR BILGE PUMP - OVERHAUL KIT INCLUDES:•1 x Diaphragm•2pcs Diaphragm clamps•1 x Door Gasket•2 x Flapper valves•S/S Fastener kit Available...

Service Kit for Hansen Meteor Bilge Pump. Includes *1 x BPS/2S Diaphragm *1 x BPT/5 Door Gasket *2 x BPT/4 Flapper Valves Available to order, conta...

Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...

Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-rei...

TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides d...

Bronze Hose tails with BSP threads. Available in multiple sizes.

Bronze Hose Tail Elbows with male BSP threads. Available in multiple sizes.

Hose Tail Female BSP Thread 90° Bend TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus ...

Designed and made in New Zealand, the Scoop Strainer is designed to divert large objects away from water intakes while the vessel is moving. This h...

Replacement seat for Lavac popular toilets. Also includes seals. See dimensions below to determine whether you have a Popular or Zenith model. DIME...

Mecca intake scoop strainer. Cast bronze with a quality chrome plated finish.Made in New Zealand. DIMENSIONS:Length Overall: 116mmWidth Overall: 89...

Henderson Mk5 Manual Bilge Pump This is a versatile bilge, waste, or water transfer pump in a lightweight but robust construction of tough plastic....

The Rule 1000 manual bilge pump is in a class by itself and is a popular choice among boatbuilders and boat owners alike. 36 mounting variations an...

Rigorous engineering and testing helped generate the new series of bilge pumps. Our pumps are tested to the highest standard, achieving rated perfo...

The Rule 500 manual bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 ...

Rule Pumps RM500B, All-in-one pump & switch (no float switch required), Automatic 500 GPH submersible 12 volt DC bilge pump preferred by yachts...

Rule Pumps RM1100A, All-in-one pump & switch (no float switch required), Automatic 1100 GPH submersible 12 volt DC bilge pump preferred by yach...

Service kit for Whale Gusher 30 bilge pumps. CONTAINS:• 2x Screw No 6 x 1 1/4 •2x Diaphragm •2x Inlet Valve & Gasket •1x Outlet Valve •2x Valve...

Bronze BSP threaded skin/through hull fittings with back nut. Designed for direct attachment of ball valve or sea cock. These genuine bronze skin ...

Skin Fittings Recessed Recessed skin fittings are ideal for cockpit drains or through hulls on racing yachts. Designed and made in New Zealand, th...

Skin Fittings Threaded TruDesign range of Skin Fittings are the first composite through hull fitting to be certified by the International Marine C...

The narrow footprint and smart back of the Compass toilet gives maximum space and maximum flexibility wherever it is installed on board. It can go ...

Cut/Short Version:Designed to match with the angled back walls. The Elegance 2G is the ‘small bowl’ design of the Flexi Line. To optimize the space...

Short Version:The Elegance 2G Short is designed to be installed on a raising step, usually 10 cm / 3.9 inches high. For this purpose, the height of...

The Elegance 2G and its models are the ‘small bowl’ size model of the Flexi Line, which is all about maximizing the comfort within reduced space. T...

Toilet seat and lid for Tecma Elegance toilets. Comes with soft-closing hinges. A strong molded wood seat with polyester coating for a durable yet ...

Lid and Seat Hinges only for Tecma Elegance toilets. Comes as a set of two chrome plated bronze hinges. Available to order, contact store via order...

Tecma Premium 2 button toilet control panel with soft touch buttons . The two button switch allows the bowl to be emptied when not in use.Works wit...

Tecma pressure gauge. Suitable for Tecma toilet installations or as a general purpose pressure gauge. Gauge Diameter: 52mm Thread Size: 12mm Pres...

Toilet seat and lid for Tecma Saninautico toilets. New model: Tecma Compass Thermosetting poly seat and cover with soft closing system Includes hin...

The Silence Plus 2G Short is the short version of the Silence Plus 2G, the ‘big bowl’ model of the Flexi-Line. The short model is designed to be in...

The Silence Plus 2G Short is the short version of the Silence Plus 2G, the ‘big bowl’ model of the Flexi-Line. The short model is designed to be in...

The Silence Plus 2G is the 'big bowl' model of the Flexi-Line, and forms the foundation for the Flexi Line. With the same features, the new design ...

Replacement Check valve for Tecma toilets. Fits on outlet pipe from toilet pump and prevents backflow into toilet bowl. Tecma Part number: T-PF.P30...

The TruDesign Aquavalve is designed and made in New Zealand, for demanding marine sanitation applications. The Aquavalve is typically used in marin...

The TruDesign Aquavalve is designed and made in New Zealand, for demanding marine sanitation applications. The Aquavalve is typically used in marin...

Principally used as a manual toilet waste pump. The free flow valve design and quick release inspection cover makes this pump ideal for a variety o...

The Gulper 320 self-priming pump is specifically designed to pump waste grey water from the shower tray, galley sink or to be used as a small bilge...