Skip to content

Rod Holders

Filters

$
$
  • HOMER CLAMP ON ROD HOLDER S/S HOM9865

    HOMER CLAMP ON ROD HOLDER S/S

    HOMER
    $89.14 - $89.14
    $89.14
    $89.14 - $89.14
    $89.14
    Low stock

    Homer Clamp on Rod Holder cast in 316 Stainless Steel. Clamps onto 22mm (7/8") or 25mm (1") rails. Mountable vertical or horizontal Length: 228mm...

    View full details
  • HOMER ROD HOLDER PLASTIC INSERT/CAP HOM9859-C

    HOMER ROD HOLDER PLASTIC INSERT/CAP

    HOMER
    $65.76 - $65.76
    $65.76
    $65.76 - $65.76
    $65.76

    Replacement plastic insert with cap for Homer rod holder HOM009859 Colour: Black.   Please note: these are Special Order items and need to be order...

    View full details
  • HOMER ROD HOLDER SIDE MOUNT 34 S/S HOM9846

    HOMER ROD HOLDER SIDE MOUNT 304 S/S

    HOMER
    $36.89 - $36.89
    $36.89
    $36.89 - $36.89
    $36.89

    Homer Side Mount Rod Holder 304 Stainless Steel with black plastic insert. Comes with straps for side mounting to seat or coaming. Length: 230mm (...

    View full details

  • ROD HOLDER DECK MOUNT CP BRASS

    CHATFIELD
    $43.29 - $43.29
    $43.29
    $43.29 - $43.29
    $43.29

    A high quality chrome-plated brass fishing rod holder. Inset deck mounting (round). Made in NZ. Limited stocks available, only while stocks last.

  • ROD HOLDER FLUSH MOUNT NYLON HOM5467-WH

    ROD HOLDER FLUSH MOUNT NYLON

    HOMER
    $4.60 - $4.60
    $4.60
    $4.60 - $4.60
    $4.60

    An economical angled plastic rod holder. Made from tough reinforced nylon. Colour: White. DIMENSIONS: Depth: 250mm Tube Outside Diameter: 50mm ...

    View full details
  • ROD HOLDER FLUSH NARROW NYLON HOM5466

    ROD HOLDER FLUSH NARROW NYLON

    HOMER
    $6.90 - $6.90
    $6.90
    $6.90 - $6.90
    $6.90

    An economical angled plastic rod holder with narrow flange designed for mounting on narrow coamings. Made from tough reinforced nylon. DIMENSIONS:...

    View full details
  • ROD HOLDER FLUSH RECTANGE FLANGE 316 S/S HOM9859

    ROD HOLDER FLUSH RECTANGE FLANGE 316 S/S

    HOMER
    $49.23 - $49.23
    $49.23
    $49.23 - $49.23
    $49.23
    In stock

    Homer Flush Mount Rod Holder. This economical holder is stamped in 304 Stainless Steel 30 Degree Angle with a soft pvc flange gasket and integral ...

    View full details
  • ROD HOLDER FLUSH ROUND FLANGE 316 S/S HOM9851

    ROD HOLDER FLUSH ROUND FLANGE 316 S/S

    HOMER
    $65.76 - $65.76
    $65.76
    $65.76 - $65.76
    $65.76
    In stock

    Homer Flush Mount Rod Holder cast in 316 Stainless Steel. 30 Degree Angle with a soft pvc flange gasket and integral flip-up cap. Length: 220mm Ini...

    View full details

  • ROD HOLDER SIDE MOUNT CP BRASS

    CHATFIELD
    $79.07 - $79.07
    $79.07
    $79.07 - $79.07
    $79.07

    An high quality chrome-plated brass fishing rod holder. Side mounting. New Zealand made. Limited stocks available. Only while stocks last.

  • ROD STORAGE HOLDER S/S & PLASTIC HOM9951

    ROD STORAGE HOLDER S/S & PLASTIC

    HOMER
    $32.00 - $32.00
    $32.00
    $32.00 - $32.00
    $32.00

    Homer Rod Holder with corrosion resistant stainless steel spring to prevent rod tip from accidentally coming out - 316 Stainless Steel. Mount to d...

    View full details

  • TUBE HOLDER CLIPS NYLON

    PNP
    $1.47 - $4.08
    $1.47 - $4.08
    $1.47 - $4.08
    $1.47

    Nylon Tube Clips. Available in a variety of different tube sizes. Great for holding pipes, rods, boat hooks, tiller extensions and many other uses....

    View full details