Plumbing

Hose tail with 120 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 120° Tails are suited to the ...

Ideal connector when different sized hoses need to be connected. Up to 3 different size Aquavalve tails can be screwed in to suit hose size and in...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI & Burea...

Blakes traditional bronze seacocks. Manufactured from the highest specification marine grade bronze. - Unique built-in grease nipples to allow in-w...

Brass Name Plates to label deck fillers. Text available in either Diesel or Water

Cockpit drain 38mm with hose tail attachment. This cockpit drain is easily installed in the same way as a skin fitting and has a hose tail for a di...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Black Glass Reinforced Nylon for high strength and durability. Labelled either "DIESEL", "WATER", or "PETROL". Accepts 38mm or 50mm (2") ID Hose.

Well drain with cover hood. Ideal for anchor lockers. White Nylon. Inside Diameter: 12.8mm Thread Diameter: 19.5mm Hood Width: 28mm Hood Length: 32mm

Bronze elbows 90 degree with female/female BSP threads. Multiple sizes available.

Service kit for Fynspray WS280 bilge pumps. Available to order, contact store via orders@harken.co.nz or 09 3033 744

Service kits for Fynspray Galley Pumps. Kits for all models available Available to order, contact store via orders@harken.co.nz or 09 3033 744

High quality all brass construction makes this swiveling spout the perfect addition to your foot pump system. Rugged and long lasting, available in...

Fynspray Sink Waste and plug fittings. Available in white nylon or chrome plated brass finish. The smaller size makes these ideal for sinks and was...

Conversion kit for Fynspray WS62 galley pump. Converts the pump to use the newer nitrile washers for longer times between services. Available to or...

High quality NZ Made Fynspray galley pump. Double action. Takes up little space. Very reliable. Chromed brass spout for salt or fresh water usage. ...

Bronze BSP threaded Hex Nipple with external thread. For joining pipes and fittings of the same diameter. Available in multiple thread sizes.

Bronze BSP threaded hex plug. For blanking of plumbing pipes and fittings. Available in multiple sizes.

Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.

Small stainless steel clamshell vent. Ideal as an attractive covering for anchor locker drains or tank vents. Available in three sizes: SMALL - Wid...

Homer Compartment Drain Hood 316 Stainless steel with nylon thread. Length can be adjusted. Perfect for anchor wells. Thread size: 19mm (3/4") We...

Homer 38mm Pipe Deck Filler cast in 316 Stainless Steel. Available with "Water" "Waste" or "Diesel" label. Fits 38mm hose. Flange Diameter: 75mm ...

Homer Straight Tank Vent Flush mount with cup. Marine Grade 316 Stainless Steel. Available in two hose sizes.

Homer Round Head Fuel Tank Vent 316 Stainless steel.

Homer Tank Vent 316 stainless steel with stainless steel screen. May be used as either a fuel or water tank vent. Thread: 19mm Hose Size: 10MM (3/...

Homer Water Tank Vent 316 Stainless Steel. Round Head with fully threaded tail. BSP thread.

Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...

Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...

Tail Long Thread 120° TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the mat...

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-rei...

TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides d...

Bronze Hose tails with BSP threads. Available in multiple sizes.

Olcese Ricci naval brass skinfittings with buit in scoop strainer. Naval brass has a very high resistance to de-zincification and other corrosion. ...

Designed and made in New Zealand, the Scoop Strainer is designed to divert large objects away from water intakes while the vessel is moving. This h...

Lavac Electric 12v or 24v Diaphragm Pump. These heavy duty and reliable pumps are proven for their long, trouble free use.Suitable for Lavac Popula...

Plastic dome mounting bolt covers for Lavac Popular toilets. (TLZ8010)

Plastic washers for Lavac Popular toilet mounting bolts (TLZ8022). DIMENSIONS: Outer Diameter: 17mm Inner Diameter: 8mm Thickness: 2mm

Replacement hinge set kit for seat and lid on Lavac Popular toilets. TLZ8064

Replacement lid and seat assembly for Lavac popular toilets. Also includes seals. See dimensions below to determine whether you have a Popular or Z...

Hand pump inlet valve for Lavac Popular and Zenith toilets. Fits Henderson Mk5 hand sanitation/bilge pump. Lavac Part number: TLZ9330 Available to ...

Lavac toilet bleed plug set. Prevents syphon effect in toilet or holding tank outlet hose. Vital safety equipment for toilet installations to prev...

Water Resistant shroud for Columbus electric time delay switch. For use with Lavac electric toilets.

Columbus electric time delay switch. Used to control electric pumps on Lavac Zenith and Lavac Popular toilets. Can also be used to control a varie...

Evolved from long and continuous research into marine pumps, these powerful and reliable pumps offer a long, trouble free working life. When it com...