Rig & Sail Handling
-
CHAIN PLATES BRONZE DAVEY
DAVEYOriginal price $35.73 - Original price $257.33Original price$35.73 - $257.33$35.73 - $257.33Current price $35.73| /Out of stockChain / Shroud Plates - Polished gunmetal bronze. To ensure correct positioning of the plates to the vessel, they are supplied undrilled, thus allo...
View full details -
GAFF SPAN SHACKLE BRONZE DAVEY
DAVEYOriginal price $75.61 - Original price $144.74Original price$75.61 - $144.74$75.61 - $144.74Current price $75.61| /Out of stockGunmetal bronze gaff span shackles. Made in England by Davey and Co. 6MM GAFF SHACKLE: Jaw Width: 6mm Pin Diameter 8mm Length 50mm 10MM GAFF SHACK...
View full details -
HALF COWL VENT BRONZE DAVEY
DAVEYOriginal price $211.81 - Original price $211.81Original price$211.81$211.81 - $211.81Current price $211.81| /Out of stockHalf Cowl Vent - Left or Right Hand - Cast from gunmetal bronze, these vents are designed to fit to the sides of engine compartments. They are usua...
View full details -
HIGHFIELD LEVER BRONZE DAVEY
DAVEYOriginal price $691.24 - Original price $691.24Original price$691.24$691.24 - $691.24Current price $691.24| /Out of stockHighfields Pattern Running Backstay Lever - Gunmetal channel section, polished outside and pivoted with two side bolts leaving the channel clear fo...
View full details -
MAST BAND BRONZE DAVEY
DAVEYOriginal price $149.89 - Original price $317.69Original price$149.89 - $317.69$149.89 - $317.69Current price $149.89| /Out of stockMast or bowsprit bands cast in gunmetal bronze with 4 eyes. Made by Davey and Co London. Available in several sizes to suit different mast diameters.
-
SHACKLE BOW BRONZE DAVEY
DAVEYOriginal price $30.19 - Original price $53.83Original price$30.19 - $53.83$30.19 - $53.83Current price $30.19| /Out of stockBronze Gunmetal bow shackles made by Davey and Co London. 6MM SHACKLE: Breaking Strain 800kg 8MM SHACKLE: Breaking Strain 1600kg 10MM SHACKLE: ...
View full details -
SPINNAKER POLE END BRONZE DAVEY
DAVEYOriginal price $598.60 - Original price $1,000.09Original price$598.60 - $1,000.09$598.60 - $1,000.09Current price $598.60| /Out of stockSpinnaker Pole End in Polished gunmetal bronze - A stylish end socket to fit a wooden spar. Sprung piston end. SPINNAKER POLE END SIZING SMALL - 10...
View full details -
STEMHEAD FITTING BRONZE DAVEY
DAVEYOriginal price $114.61 - Original price $114.61Original price$114.61$114.61 - $114.61Current price $114.61| /Out of stockStem head Fitting cast in polished gunmetal bronze. This strong stem head fitting takes the load down the front of the stem and is suitable for cra...
View full details -
WYKEHAM MARTIN FURLING SYSTEMS
DAVEYOriginal price $1,250.72 - Original price $1,250.72Original price$1,250.72$1,250.72 - $1,250.72Current price $1,250.72| /Out of stockWykeham Martin Furling GearIn continuous production for over 100 years, this traditionalfurling gear has been successfully fitted to thousands of b...
View full details