Skip to content

Rig & Sail Handling

Filters

  • BELAY PIN GUNMETAL BRONZE DAVEY
    Sold out

    BELAY PIN GUNMETAL BRONZE DAVEY

    $156.55 - $156.55
    $156.55
    $156.55 - $156.55
    $156.55
    Out of stock

    Davey Gunmetal Bronze Belaying Pins - O.A. Length 8-3/4" (222mm); Stem Length 5" (125mm); Stem Ø 5/8" (16mm)

  •

    BOWSPRIT PLATE BRONZE DAVEY

    $64.22 - $172.42
    $64.22 - $172.42
    $64.22 - $172.42
    $64.22
    Low stock

    Bowsprit Plates - Polished gunmetal bronze. To ensure correct positioning of the plates to the vessel, they are supplied undrilled, thus allowing t...

    View full details

  • CHAIN PLATES BRONZE DAVEY

    $42.73 - $307.77
    $42.73 - $307.77
    $42.73 - $307.77
    $42.73
    Low stock

    Chain / Shroud Plates - Polished gunmetal bronze. To ensure correct positioning of the plates to the vessel, they are supplied undrilled, thus allo...

    View full details
  • Sold out

    CLEVECO 19MM C TRACK S/S

    $38.51 - $46.64
    $38.51 - $46.64
    $38.51 - $46.64
    $38.51
    Out of stock

    Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

    View full details

  • GAFF SPAN SHACKLE BRONZE DAVEY

    $90.42 - $173.11
    $90.42 - $173.11
    $90.42 - $173.11
    $90.42
    Low stock

    Gunmetal bronze gaff span shackles. Made in England by Davey and Co. 6MM GAFF SHACKLE: Jaw Width: 6mm Pin Diameter 8mm Length 50mm 10MM GAFF SHACK...

    View full details
  • HALF COWL VENT BRONZE DAVEY RIGHT HAND
    HALF COWL VENT BRONZE DAVEY LEFT HAND
    Sold out

    HALF COWL VENT BRONZE DAVEY

    $253.32 - $253.32
    $253.32
    $253.32 - $253.32
    $253.32
    Out of stock

    Half Cowl Vent - Left or Right Hand - Cast from gunmetal bronze, these vents are designed to fit to the sides of engine compartments. They are usua...

    View full details
  • HIGHFIELD LEVER BRONZE DAVEY DAV2655
    Sold out

    HIGHFIELD LEVER BRONZE DAVEY

    $826.72 - $826.72
    $826.72
    $826.72 - $826.72
    $826.72
    Out of stock

    Highfields Pattern Running Backstay Lever - Gunmetal channel section, polished outside and pivoted with two side bolts leaving the channel clear fo...

    View full details

  • MAST BAND BRONZE DAVEY

    $179.27 - $379.95
    $179.27 - $379.95
    $179.27 - $379.95
    $179.27
    Low stock

    Mast or bowsprit bands cast in gunmetal bronze with 4 eyes. Made by Davey and Co London. Available in several sizes to suit different mast diameters.

  • SAIL SLIDES BRASS EXTERNAL GEN.9.84

    SAIL SLIDES BRASS EXTERNAL

    $8.31 - $8.31
    $8.31
    $8.31 - $8.31
    $8.31
    In stock

    Brass external sail slides to fit brass internal 16mm or 20mm tracks. Slide Length 24mm. Comes with round thimble for lashing to sail.

  •

    SHACKLE BOW BRONZE DAVEY

    $36.11 - $64.38
    $36.11 - $64.38
    $36.11 - $64.38
    $36.11
    Low stock

    Bronze Gunmetal bow shackles made by Davey and Co London. 6MM SHACKLE: Breaking Strain 800kg 8MM SHACKLE: Breaking Strain 1600kg 10MM SHACKLE: ...

    View full details

  • SHACKLE DEE BRONZE DAVEY

    $22.78 - $61.42
    $22.78 - $61.42
    $22.78 - $61.42
    $22.78
    Low stock

    Bronze Gunmetal bow shackles made by Davey and Co London. 4MM SHACKLE: Breaking Strain 500kg 6MM SHACKLE: Breaking Strain 800kg 8MM SHACKLE: Br...

    View full details
  • SPINNAKER POLE END BRONZE DAVEY DAV3422/GM

    SPINNAKER POLE END BRONZE DAVEY

    $715.93 - $1,196.12
    $715.93 - $1,196.12
    $715.93 - $1,196.12
    $715.93
    Low stock

    Spinnaker Pole End in Polished gunmetal bronze - A stylish end socket to fit a wooden spar. Sprung piston end. SPINNAKER POLE END SIZING SMALL - 10...

    View full details
  • Sold out

    STEMHEAD FITTING BRONZE DAVEY

    $137.07 - $137.07
    $137.07
    $137.07 - $137.07
    $137.07
    Out of stock

    Stem head Fitting cast in polished gunmetal bronze. This strong stem head fitting takes the load down the front of the stem and is suitable for cra...

    View full details
  • STEMHEAD FITTING BRONZE LIGHTWEIGHT

    STEMHEAD FITTING BRZ LIGHTWEIGHT

    $137.07 - $137.07
    $137.07
    $137.07 - $137.07
    $137.07
    Low stock

    Stem head Fitting cast in polished gunmetal bronze. Suitable for dinghies up to around 12 foot. LENGTH: 110MM WIDTH: 20MM

  • Sold out

    WYKEHAM MARTIN FURLING SYSTEMS

    $1,495.85 - $1,495.85
    $1,495.85
    $1,495.85 - $1,495.85
    $1,495.85
    Out of stock

    Wykeham Martin Furling GearIn continuous production for over 100 years, this traditionalfurling gear has been successfully fitted to thousands of b...

    View full details