Products

Ronstan Small Mast Exit Plate. Reduces abrasion of halyards and other control lines as they pass through exit slots in spars.Slot width 10mm Ma...

Ronstan spinnaker Pole Ring with curved base. Applications •Suit most common mast profiles Materials •Grade 316 stainless steel SPECIFICATIONS ...

Ronstan heavy duty spinnaker Pole Ring with curved base and braced ring. SPECIFICATIONS Material Ø: 11.0 mm Ring Ø: 44.0 mm Mast Ø: 80.0 mm Wei...

Ronstan 304 grade stainless steel wire rope thimbles. Used to create a rigid eye in the end of wire rope. Available in multiple sizes.

Ronstan stainless steel Stay Adjusters. Applications •Typically used on dinghies, catamarans and small keelboats Materials •Grade 316 stainless ...

Ronstan Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications •For wire end termination...

Ronstan Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications •For wire end termination...

Ronstan Laser etched calibration marks allow accurate, repeatable settings for precise adjustement and tuning of rig tension. Type 1 turnbuckles ha...

Rubbaweld Mast Boot Tape is a Self amalgamating tape that welds to itself by chemical action to form a waterproof covering. This tape is a non-adhe...

Cleveco 3 hole stainless mast tang. Ideal for stay attachment on dinghy masts. Length: 68mm Width: 15mm Hole Spacing 26mm

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Crystal clear mylar tape ideal for repairs to mylar panels & clear sail windows. Will also repair cracked perspex windows & hatches. Roll ...

PNP Heavy Duty Nylon sail slide with stainless steel reinforcement. Fits 7/8" (22mm) flat mast track. •Suitable for Keelboat and Trailerable yacht...

Teflon impregnated Nylon sail slides to fit flat mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Brass external sail slides to fit brass internal 16mm or 20mm tracks. Slide Length 24mm. Comes with round thimble for lashing to sail.

Teflon impregnated plastic sail slugs. Available to suit various sizes of round mast track.

Teflon impregnated Nylon sail slugs to fit round mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Strong Stainless Steel sail slugs to fit round 3/8" 10mm mast tracks.

Seasure Rip-Stop spinnaker repair tape. Lightweight and very strong, this self adhesive spinnaker repair tape makes a rapid long-lasting repair to ...

Annealed stainless steel locking wire. 304 grade stainless steel with a diameter of 0.8mm. Available in 10 foot or 100 yard rolls.

Self amalgamating tape that welds to itself by chemical action to form a waterproof covering. This tape is a non-adhesive tape. It bonds to itself,...

PNP Sheave Glass reinforced for greater strength and abrasion resistance. •Glass reinforced Nylon suitable for high load applications. Comes in a ...

Cleveco Delrin Sheaves. An economical range of sheaves made from tough Delrin plastic. Ideal for in-mast and in-boom sheaves. Sizing as per the fol...

The SMC Rigging Ring is the strongest aluminum ring of its size in the market and is only limited by your imagination and rigging expertise.  The S...

The Seasure flexible spinnaker pole bracket can be used in places where the crew may stand on them or where reduction in noise inside the boat is r...

PNP Spinnaker Pole Ends. Manufactured from tough, abrasion resistant Nylon for minimum weight and corrosion resistance. Snap-on beak design allows ...

Riley Clevis Pin Stay Adjuster Stainless Steel. 89mm to 127mm adjustment range with direct end fastening by means of forked end to chainplates or ...

Riley Vernier Stay Adjuster Stainless Steel. Allows 50mm adjustments in 3mm increments. Breaking Strain: 800kg DIMENSIONS: Min Eye-Eye Length: ...

Riley Extra Long Vernier Stay Adjuster Stainless Steel. Allows 50mm adjustments in 3mm increments. Strap can be cut shorter if necessary. Ideal fo...

A new range of simple and very light weight handles in three colours and 52mm or 65mm diameter. DIMENSIONS Overall Diameter: 50mm Thickness: 11mm H...

Seasure Trapeze Ring with Sheave A compact lightweight ring with built in sheave for use on continuously adjustable systems. DIMENSIONS: Overal...

These strong and light weight spreader bars improve comfort when hiking out and allow for ease of adjustment. Suitable for 50mm and 40mm webbing.

Homer closed body turnbuckle 12mm with jaw to jaw attachments. SPECIFICATIONS:Closed Length: 230mmOpen Length: 335mmBody Length: 150mmBody Diameter...

Wire rope grips galvanized. The easy way to create loops in the end of wire ropes. Simply loop the wire through and tighten the bolts. Available in...

In a 19 wire strand (1 x 19), 6 wires are laid around a centre wire with a right hand lay in the first phase of production, 12 wires are then laid ...

Stainless steel 7/7 and 7/19 (AISI 316) wire rope. A very flexible wire rope ideal for halyards, lifelines, balustrading and shade sail application...

Kong wire rope Thimble 316 Stainless steel. Made in italy. Max Wire Ø 2.5mm, Inside Opening: width 9mm Length 16mm Groove width 3mm Weight 2g