Products

Simple and easy system to mount your Calypso Ultrasonic Wind Meter unit on either side of your mast, both horizontally and vertically

Bluetooth, Solar Powered, pocket-sized ULTRASONIC anemometer.Small and robust, get instant wind speed and direction....or track it!. Built with ULT...

Single Block Hanger Will fit all "Cleveco" ferrule top blocks and is useful for many other attachments onto booms. Can be bent to suit various boom...

Copper talurits for permanently crimping loops or eyes into the end of wire ropes. Can be used with hand crimping tools or hydraulic press. Availa...

DURALAC 115ml Paste for insulating between dissimilar metals. Particularly good for stainless steel fittings on alloy masts, spars and tracks. Insu...

Homer Boom Strap for hanging mainsheet blocks from dinghy booms. 316 Stainless Steel, two sizes available. SMALL BLOCK HANGER SPECIFICATIONS Max ...

Homer Sail Track Stop Internal portion of stop dimensions: • Length: 22mm •ø 13mm •Weight 41gr

Homer stay Adjuster Plates   SMALL STAY ADJUSTER SPECIFICATIONS •316 Stainless Steel •LENGTH 85mm •WIDTH 10mm •Adjustment increments-3mm •Thick...

Homer Eye to Eye Open body Turnbuckle.Aisi 316 stainless steel.Available in 3 sizes.Not Load Rated SPECIFICATIONS5mm Turnbuckle:- Thread Diameter: ...

Homer Jaw to Jaw Open body Turnbuckle. Available in three sizes. AISI 316 Stainless Steel Not Load Rated Specifications:5mm Turnbuckle:- Thread Dia...

High quality bronze piston jib hanks. Made in Sweden. Bend tab down to fasten to sail.

KONG Pressure die-cast Jib Hanks. These are made of steel bronze (softer material than the stainless steel of the stay), therefore they do not dama...

Lifting system for inflatable boats (RIB) made of a three-point lifting sling with rigging plate, additional bridle for fourth attachment point, an...

 Get the most out of your sailboat with the Loos PT series of gauges. These gauges are designed for setting the proper tension in the standing rigg...

Screw pin only for Riley stay adjusters. M6 x 4mm machine screw fits all Riley stay adjusters.

Piston jib hanks for up to 1/4" (6mm) wire. Nylon body with brass piston. Suitable for Dinghy, Trailerable yacht and small Keelboat jibs. Length: ...

PNP Nylon sail slug to suit Selden 12mm track section. •Suitable for Keelboat, Dinghy and Trailerable yacht mainsails •Impact resistant, U.V. stab...

High quality general purpose PVC tape manufactured to BS3924. Flame retardant (will self-extinguish if it catches fire). Good for electrical insula...

Bronze barrell only for closed body rigging screws. Chrome plated bronze  

Closed body rigging screws. Chrome plated bronze body with 316 stainless steel ends. Available in several thread sizes with different end options....

Riley Fixed Band Pin Type Gooseneck with tack shackle. Stainless Steel. Pin Diameter: 9.5mm Pin Length: 65mm Fits masts 60mm to 90mm

Riley Fixed Band Pin Type Gooseneck. Stainless Steel. Pin Diameter: 9.5mm Pin Length: 65mm Fits masts 60mm to 90mm

Riley Pin Type Gooseneck with slide to fit bolt rope tracks Pin: 9.5mm Fits sail track 9.5mm diam and larger. Sail and downhaul secured with scr...

Riley bronze sheave suitable for rope or wire. Bronze provides low friction turning and great wear resistance. DIMENSIONS: Outside Diameter: 38mm ...