Above Deck

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

The smallest open nylon cleat. Black or White are standard. Other colours available to order. Use for control lines on dinghies and kayaks. The whi...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Mecca chrome plated bronze mooring cleats. 2 hole.  A high quality cleat made in NZ Specifications: Length: 133mmBase Length: 53mmBase Width: 21mmH...

Stainless steel general purpose cleats. Ideal for flag poles, blinds, and many other uses.

Chrome plated bronze angled deck cleat 100mm high. A stylish cleat ideal for the foredeck of runabouts and trailer boats. Width 100mm Height 50mm ...

Cleats cast in solid bronze with 2 hole fastening. Traditional appearance and solid construction makes these ideal for smaller classic boats or fla...

Polished brass cleat. Ideal for blind and curtain draw strings as well as wooden flag poles. Length: 50mm Width: 14mm Height: 15mm

Nylon Jamb Cleat, Up To 6mm Rope Glass Reinforced Nylon Jamb Cleat With Fairlead Length Overall: 84mm Hole Spacing: 67mm WT: 15g

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

Cleveco Chrome Plated Bronze Track End Stop Suit 32 x 6mm (1 1/4" x 1/4") T- Track Product Code: MW128X

Cleveco stainless steel backing plates for saddles. Ideal for linking traveller cars or various other uses.

CLEVECO STAINLESS STEEL LINK PLATES Ideal for linking traveller cars or various other uses.

Cleveco Stainless Steel safety catch for holding dinghy rudders onto the transom gudgeons.DIMENSIONS:Overall Length: 102mmMounting Side Length: 38m...

Cleveco Stainless Steel Towing Eye. Staggered length to fit angled stems. 8mm (5/16") x 19mm (3/4") Towing Eye 171mm Threaded Length Under Base B/...

Cleveco U bolts with deck collars. Stainless Steel

Cleveco U bolts with deck plate. Stainless Steel

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through cockpit coamings. SMALL Max Rope Size: 8mm Over...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through coamings. The two sheaved variety is designed for...

Used to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Suitable for washboards up to 19...

Control line calibration strip. Waterproof PVC with sticky back. Attach to deck and use to achieve repeatable sail trim settings.   250mm long

Copper talurits for permanently crimping loops or eyes into the end of wire ropes. Can be used with hand crimping tools or hydraulic press. Availa...

304 stainless steel Cup Hook with wood screw thread.

Made from 316 Stainless Steel in the UK. These plates are blind drilled and tapped to give a water tight deck seal even when not in use. Can be ord...

Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can be found ...

Nylon deck bush for leading lines through decks, bulkheads or coamings. Available in black. DIMENSIONS length: 57mm Width: 38mm Thickness: 12mm Dep...

Deck Eye with 11mm hole for leading lines through or lashing lightly loaded objects. DIMENSIONS: Length: 34mm Width: 22 Height: 25mm Hole Size: 10...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Chrome plated bronze deck filler caps. To suit Mecca deck fillers.Made in New Zealand. Available in 1-1/4" (32mm) and 1-1/2" (38mm) BSP Thread sizes.

Tenob deck filler cap. Fits all styles and sizes of Tenob plastic deck fillers.

Black Glass Reinforced Nylon for high strength and durability. Labelled either "DIESEL", "WATER", or "PETROL". Accepts 38mm or 50mm (2") ID Hose.

Grommets suitable for passing lines, lashings, or wires through decks or bulkheads. Available in two sizes. SMALL GROMMET Flange Diameter: 12mm Cut...