General Dinghys Fittings

Plastic bullet block. Designed for lashing attachment. Ideal for lazyjacks and other lightly loaded lines. Made in NZ Sheave diameter: 28mm Length:...

Stainless Steel Channel Section Dinghy Jib Rack With stem fitting and provision for fitting of tow ring. Stem Fitting Length: 87mm Pin Diameter: 6...

Create a non damaging soft rubrail or rubbing strip on the gunnel of your boat. Gunnel Guard Soft but tough two piece PVC fender strip. Helps prev...

Cleveco Handle general purpose Stainless Steel. Made in NZ. Dimensions: Overall Length: 175mm Handle Length: 100mm Width: 20mm Height: 32mm

Homer clevis pins with spring loaded rotating toggle for a secure hold yet easy release. 304 grade Stainless Steel.

Homer clevis pins with spring loaded ball end for a secure hold yet quick and easy installation and removal. 304 grade Stainless Steel. Available ...

Nothing lives up to our slogan better than Little Grippa - whatever you’re about Little Grippa bungy tie down is the product for you. It’s got so m...

The Little Grippa rope cleat can be used with either conventional braided rope or shock cords. Ideal for all kinds of uses including tie downs, sai...

Marlow's Waxed Polyester Whipping Twine is widely regarded as the best whipping twine on the market. Available in a variety of colours (size no. 4 ...

GULL OAR SLEEVES. Made from Black Polyurethane plastic, these sleeves cannot be broken under extreme conditions, are very resistant to abrasion and...

Cleveco Murray "P" Class Bow handle/forestay attachment. Stainless steel. The eye takes 5mm shackle.

Plastic parrel beads, available in multiple colours. Please note outside diameter is 27mm. Max rope size 6mm.

Plastic parrel beads, available in multiple colours. Outside diameter is 32mm. Max rope size 6mm.

Seasure plastic parrel beads. A complete range of 2 sizes and 4 colours so that control lines within the boat can be colour coded. They are counter...

PNP Push in bushes with stainless steel liners. Ideal for leading control lines through decks and coamings on sailing dinghies. Stainless steel lin...

PNP Screw in bushes with stainless steel liners. Ideal for leading control lines through decks and coamings on sailing dinghies. Stainless steel li...

Riley Trapeze plate stainless steel. 4 X 45mm Slots. DIMENSIONS: Base Size: 82mm x 82mm Hook Opening: 21mm

Riley Pear Shaped Trapeze Ring. Single Bar. Stainless Steel. DIMENSIONS: Overall Length: 145mm Overall Width: 75mm Bar Width: 55mm Max Internal W...

Stainless steel rowlock plate. Long shank minimises friction, noise and wear. Fits 9mm + 10mm rowlocks. Sold in pairs.

Stainless steel rowlock plate. Mounts on inside of gunnel. Long shank minimises friction, noise and wear. Fits 10mm rowlocks. Sold in pairs

Plain, flat brass rowlock plates. Easy to fit to most dinghies. Rowlock plates are necessary to help prevent excessive wear to wooden gunnels as we...

Open Bronze Rowlocks - Cast Bronze Finish - 9mm OR 12mm shaft (Sold In Pairs)

Closed Stainless Steel Ring Rowlocks with plastic covers - 9mm shaft Sold In Pairs

Vee Bow Type Stainless Steel Handle And Forestay Attachment. Commonly used on boats like the Starling. Length: 150mm WT: 85g

Tenob nylon Bodic hook. Easily tied to the end of shock cord and bung cord to create a quick and easy tie down of any length. Length: 50mm Throat ...

PNP Nylon spinnaker pole deck holder. Designed to accommodate most size spinnaker poles up to 65mm. Includes hole and hook for bungy hold down cor...

Homer Stainless Steel split rings. Perfect for securing clevis pins while still being easy to remove.

Riley two bar eliptical Trapeze extension. Stainless Steel. DIMENSIONS: Overall Length: 190mm Small Bar Length: 40mm Long Bar Length: 60mm Wire ...

Riley double ring Trapeze extension. Stainless Steel. DIMENSIONS: Overall Length: 185mm Ring Inside Diameter: 39mm Ring Outside Diameter: 48mm W...