Above Deck

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3853 track mounts to mast using a unique...

Screwpin endstop kit for System C 32mm track mounted on flat mast groove. Use pinstop endstop to easily remove cars and mainsail. Order one kit onl...

Mounting kit for System C 32mm mast track. Mounting kit slugs are for flat mast grooves. Order one kit per track section. Mounting slug length (m...

Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat...

ThIS simple and lightweight tiller extension design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort. The ...

The base cover snaps off to remove tiller extension. Weight (g) 5 g Weight (oz) 0.18 oz Length (mm) 44 mm Length (in) 1 3/4 in Width (mm) 22 m...

Stand-up toggles hold blocks upright on travellers. Stand-up toggles with control tangs allow attachment of control blocks. Fits Harken Small Boat ...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam 22mm variable hole spacing t...

Harken 22mm Small Boat High Beam Track. Can be used to span gaps between cockpit seats or over tillers. Suitable for keelboats up to 8mTrack is ext...

Harken 27mm mast track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3844 track mounts to ma...

Mounting kit for Harken System B 27mm mast track into round mast grooves. Order one kit per track section. Mounting slug length (mm) 22 mm Mount...

Mounting kit for Harken System B 27mm mast track into wide flat mast grooves. Order one kit per track section. Mounting slug length (mm) 22 mm M...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Trigger cam cleats allow loaded lines to be e...

The cam mounting bracket attaches the Trigger cleat to 76 mm (3.00 in) low-profile triples. It fits the 152 and 411. Height (mm) 6 mm Height (in)...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, comp...

Flexible universal joint rotates to any nagle and does not bind like metal universal joints. Fits any Harken tiller extension as well as many other...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of...

Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of hardcoat-anodized, PTFE-impr...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wir...

Wire cam leads maintain a low profile while holding the line close to the cleat. Fits Harken Standard and Micro cam cleats.  Specifications S...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced Carbo Cam cleat and wir...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. Kit includes hardcoat-anodized aluminum Cam-Matic® cle...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...

Olcese Ricci Stainless Steel Hasp and Staple. Padlockable. DIMENSIONS: Hasp Length: 90mm Base Length: 35mm Width: 40mm Overall Length: 125mm Keep...

Stainless steel hatch support spring. Bend spring in middle to close hatch. Length 280mm

Homer clevis pins with spring loaded rotating toggle for a secure hold yet easy release. 304 grade Stainless Steel.

Homer Single Bow Eye 316 Stainless steel. Heavy duty cast stainless steel eye. Perfect for trailerable powerboats. Length of thread: 75mm (3") Th...

Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.

Homer Expanding Bung suits 25mm(1") hole. Brass or Stainless Steel body with rubber bung. Twist handle to expand bung and seal.

Homer Clamp on Rod Holder cast in 316 Stainless Steel. Clamps onto 22mm (7/8") or 25mm (1") rails. Mountable vertical or horizontal Length: 228mm...

Homer low flat cleats with four mounting holes. Cast in solid marine grade 316 stainless steel. Available in 3 sizes.

Homer Open Base Cleat with four Holes cast 316 stainless steel. A stylish cleat with highly polished finished.

Homer "Pop-Up" Cleat 316 Stainless steel - Retractable cleat retracts to only 12.5mm (1/2") above deck and has direct drainage to the bilge. Instal...