Above Deck

The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control. Fits Harke...

Wedge kits improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Micro St...

Replacement internal springs for Harken cam cleats. Available for and compatible with Micro, Standard, and Offshore cleats.

Harken® ball bearing Cam-Matic cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-a...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...

The 433 and 394 dinghy clew hooks are designed for Lasers® and other loose-footed dinghies. They install permanently on the boom and allow you to i...

Low-profile Through Deck Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for din...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

Harken Dyneema LOUP soft attachments replace heavy stainless steel shackles on racing and cruising boats. Weight savings on large offshore boats ca...

Endstop kit for System C 32mm mast tracks on Selden spars. Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctit...

Endstop for System A 22mm battcar track, fits on to wide flat mast grooves. Use screwpin endstop to easily remove cars and mainsail. Order one kit....

Endstop for System A 22mm battcar track, fits on to round mast grooves. Use screwpin endstop to easily remove cars and mainsail. Order one kit. T...

Fixed endstop for Harken 27mm mast track to fit to flat mast grooves. Endstops absorb shock loads and prevent damage to the car. Kits include endst...

Fixed endstop for Harken 27mm mast track to fit to round mast grooves. Endstops absorb shock loads and prevent damage to the car. Kits include ends...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Can be ...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop ca...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Fast Release Camcleats feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the lin...

The 062 handhold is popular on boats like Solings and scows to help hiking crew reenter the boat. It has drain holes. A (mm) 146 mm B (mm) 89 mm ...

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing st...

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing st...

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing st...

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded...

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing st...

Hexaratchets® grip loaded sheets, yet allow sailors to ease and trim quickly and with complete control. A switch on the side engages and disengages...

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ...

Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays ...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. A (mm) ...

Use the 2705 control tang set for 1:1 purchase (no end controls necessary). Fits on Harken 13mm ball bearing traveller cars #2700 and #2702. Sold i...

Harken Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 13mm Micro High Beam track is sui...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

End Stop for System AA 13mm low beam mast track. Use screwpin endstop to easily remove cars and mainsail. Order one kit. Track end length (mm) 15...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included. Fits Harken 13mm High Beam...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.Fits Harken #2707 and 2709 ...

Mounting kit for System C 32mm mast tracks to fit Selden mast grooves. Order one kit per track section. Mounting slug length (mm) 22 mm Mounting...

Folding padeyes keep your deck and passageways clear. They’re ready when you need to attach a snatch block or fender, but fold safely out of the wa...

Folding padeyes keep your deck and passageways clear. They’re ready when you need to attach a snatch block or fender, but fold safely out of the wa...

Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. Harken® of...

Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. The 627, 6...