Above Deck

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Stainless steel general purpose cleats. Ideal for flag poles, blinds, and many other uses.

Cleats cast in solid bronze with 2 hole fastening. Traditional appearance and solid construction makes these ideal for smaller classic boats or fla...

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

Cleveco Chrome Plated Bronze Track End Stop Suit 32 x 6mm (1 1/4" x 1/4") T- Track Product Code: MW128X

Cleveco stainless steel backing plates for saddles. Ideal for linking traveller cars or various other uses.

CLEVECO STAINLESS STEEL LINK PLATES Ideal for linking traveller cars or various other uses.

Cleveco Stainless Steel safety catch for holding dinghy rudders onto the transom gudgeons.DIMENSIONS:Overall Length: 102mmMounting Side Length: 38m...

Cleveco U bolts with deck collars. Stainless Steel

Cleveco U bolts with deck plate. Stainless Steel

Used to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Suitable for washboards up to 19...

Control line calibration strip. Waterproof PVC with sticky back. Attach to deck and use to achieve repeatable sail trim settings.   250mm long

Copper talurits for permanently crimping loops or eyes into the end of wire ropes. Can be used with hand crimping tools or hydraulic press. Availa...

304 stainless steel Cup Hook with wood screw thread.

Traditional curved open top bronze cleats, manufactured by Davey & Co in the U.K. made from gunmetal bronze with a highly polished finish. Ope...

Made from 316 Stainless Steel in the UK. These plates are blind drilled and tapped to give a water tight deck seal even when not in use. Can be ord...

Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can be found ...

Nylon deck bush for leading lines through decks, bulkheads or coamings. Available in black. DIMENSIONS length: 57mm Width: 38mm Thickness: 12mm Dep...

Deck Eye with 11mm hole for leading lines through or lashing lightly loaded objects. DIMENSIONS: Length: 34mm Width: 22 Height: 25mm Hole Size: 10...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Black Glass Reinforced Nylon for high strength and durability. Labelled either "DIESEL", "WATER", or "PETROL". Accepts 38mm or 50mm (2") ID Hose.

Grommets suitable for passing lines, lashings, or wires through decks or bulkheads. Available in two sizes. SMALL GROMMET Flange Diameter: 12mm Cut...

White Nylon Drain Plug 19mm. An economical drain bung for dinghies and small craft. DIMENSIONS Flange: 51 x 35mm Cutout Diameter: 22mm Thread Dia...

Tenob large nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. F...

Tenob medium nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. ...

Replacement drain bung only for Nairn drain plugs. Comes with stainless steel retainer clip. Thread Diameter: 20mm Flange Diameter: 30mm

PNP Drain bung nylon white. Includes plug and housing. Rubber O-Ring provides a watertight seal. DIMENSIONS: Thread Diameter: 19mm Cutout Diameter...

Nairn Nylon drain plug with a precision fit watertight seal without the need for O-rings. Coarse single thread, with detachable stainless steel ret...

Tenob nylon drain bung 17mm fine thread. Includes rubber washer for optimum seal. Stainless steel clips help prevent bung from being lost. A high q...

Fosters Drain Plugs. Light weight and cost effective. Ideal for small dinghies, canoes and kayaks. Replacement flanges and bungs also available. Fl...

Solid cast manganese bronze eye bolts. Ideal for many purposes on traditional vessels.

Deadeye/Fairlead with 6mm hole. White nylon or black nylon. Ideal as a line guide or lashing eye on sailing dinghies.

Riley Stainless Steel Vee jammer with fairlead. Suitable for rope sizes 4-6mm. DIMENSIONS: Length: 68mm Width: 19mm

Angled Bow fairleads in gunmetal bronze. Available in 3 different lengths and port or starboard configurations. Made in the UK by Davey and co.

Through Bulwark Fairleads - These fairleads are cast in gunmetal in two equal halves and supplied undrilled. For screw fixing the holes should be d...

Straight fairleads in gunmetal bronze with lip to protect gunnel or toerail. Available in 3 different lengths. Made in the UK by Davey and co.

Riley nylon fairleads with stainless steel inserts. A high quality fairlead with large radius stainless bushes to minimise friction. Ideal for lea...

PNP Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners pro...

PNP Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Made from Impact resistant...

Polished Gunmetal leads to pass sheets and control lines along side decks or through cockpit comings etc. I.D.Ø16mm ; Width O.A. 50mm; Height O.A. ...