How many yachtsmen have struggled to reach the gooseneck, the highest reef point or the top of the sail cover by attempting to balance on a halyard, winch or something even smaller? Well now there's a quick and simple solution.

Now available are the lightweight, rattle free, aesthetic, strong and foldable mast steps. These steps are easily and unobtrusively fitted to the mast providing safe and secure footholds while climbing or working the mast.

The "Mast Step" is manufactured from a special combination of Nylon/Glass fibre which together with its design gives the step enormous strength. With a 3% additive, it makes the mast step UV resistant and prevents material degradation.

The steps weighs only 165grams each (weight is always a consideration for products up a mast), and when folded does not snag ropes or sails due to the snag-free design. At anchor or on a mooring the steps do not rattle in the wind and there is a choice of colours to match the mast - white, black and grey.

Each mast step has a working load of 140kg.

The steps are placed on opposite sides of the mast with a recommended spacing of 375mm and two opposite each other 1200mm down from the top of the mast for stable and safe working on sheaves, halyards and masthead instruments. Due to its construction and the materials used, it is easy to adjust the step to fit the radius of the mast. Simply tape a sheet of sand paper at the position where the step is to be fitted, rub the saddle of the step up and down until the step snugly fit's the mast curvature.

When using the steps to climb the mast, one simply unfolds the steps in front as one ascends and folds them behind him as you descend the mast. The steps also provide a secure foothold but it is always strongly recommended to use a harness with a safety line attached.

-Corrosion free
-No electrolysis as with stainless steel fitted to aluminium
-No rattling
-Available in Grey, Black and White
-UV resistant

-Base Width: 67mm
-Base Height: 105mm
-Step Length: 128mm
-Working Load 140kg