40mm Protexit™ Exit Block

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too. 

Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

SPECIFICATIONS

Sheave Ø (mm)40 mm

Length (mm)107 mm

Weight (g)74 g

Maximum line Ø (mm)8 mm

Fasteners (mm)6 FH mm

Fastener spacing (mm)75 mm

A (mm)19.7 mm

B (mm)59.2 mm

Maximum working load (kg)400 kg

Breaking load (kg)800 kg