TRU DESIGN

Hose tail with 120 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 120° Tails are suited to the ...

Ideal connector when different sized hoses need to be connected. Up to 3 different size Aquavalve tails can be screwed in to suit hose size and in...

Hose tail with 90 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 90° fittings are suited to the...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI & Burea...

Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...

Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...

Tail Long Thread 120° TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the mat...

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-rei...

TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides d...

Hose Tail Female BSP Thread 90° Bend TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus ...

Designed and made in New Zealand, the Scoop Strainer is designed to divert large objects away from water intakes while the vessel is moving. This h...

Skin Fittings Recessed Recessed skin fittings are ideal for cockpit drains or through hulls on racing yachts. Designed and made in New Zealand, th...

Skin Fittings with Tails for above waterline use. The Skin Fitting with Tail body and nut are moulded from glass-reinforced nylon composite. High s...

Skin Fittings Threaded TruDesign range of Skin Fittings are the first composite through hull fitting to be certified by the International Marine C...

The TruDesign Aquavalve is designed and made in New Zealand, for demanding marine sanitation applications. The Aquavalve is typically used in marin...

The TruDesign Aquavalve is designed and made in New Zealand, for demanding marine sanitation applications. The Aquavalve is typically used in marin...

Vented Loops Designed and made in New Zealand, TruDesign Vented Loops are the superior composite siphon-break solution for marine applications. Ve...