harken

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22mm High Beam Tracks. Fasteners (mm) 5 mm Fasteners (in) #10 FH in...

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. Drum Only, does not in...

Designed for one-person operation. Raise and lower with a single control rope. Patented design lifts and lowers loads evenly, regardless of weight ...

Designed for one-person operation. Perfect for storage of Paddleboards, Surfboards, canoes and kayaks as well as general storage. Raise and lower ...

Designed for one-person operation. Perfect for storage of Paddleboards, Surfboards, canoes and kayaks as well as general storage. Raise and lower w...

Furled staysails are easy to hoist rolled and can be deployed or doused from the cockpit. In marginal conditions the sail can be struck instantly w...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

Lazy Jacks contain mainsails while reefing and dousing allowing the mainsail to be raised and lowered from the cockpit without going on deck. They ...

Lazy Jacks contain mainsails while reefing and dousing allowing the mainsail to be raised and lowered from the cockpit without going on deck. They ...

Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays ...

Use screecher furling systems on multihulls up to 9.60 m (32 ft) and easily driven sport boats. Perfect for jib reaching, screechers are set on the...

The Lock-in Winch Handle Repair Kit includes a lock-in knob, spring pin, lock-in spring, isolator, and lock-in plate. Fits all Harken® winch handle...

Use T2 Loops in Carbo T2 blocks. These strong, lightweight soft attachments are woven of Dyneema® fibers, and are load-set and locked-stitched to p...

Use T2 Loops in Carbo T2 blocks. These strong, lightweight soft attachments are woven of Dyneema® fibers, and are load-set and locked-stitched to p...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm...

Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Sheave Ø (mm) 57 mm Sheave Ø (in) 2 ...

Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Sheave Ø (mm) 76 mm Sheave Ø (in) 3...

Safely store your winch handle in this strong, lightweight (3.2 oz), UV-resistant mesh holder. Drain hole in bottom. Accommodates most winch handle...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. A (mm) ...

16 mm control blocks spin on stainless steel balls that roll freely under high loads. Fits on Harken 13mm ball bearing traveller cars #2700 and #27...

Use the 2705 control tang set for 1:1 purchase (no end controls necessary). Fits on Harken 13mm ball bearing traveller cars #2700 and #2702. Sold i...

Harken Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 13mm Micro track is suited to din...

Harken Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 13mm Micro High Beam track is sui...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

End Stop for System AA 13mm low beam mast track. Use screwpin endstop to easily remove cars and mainsail. Order one kit. Track end length (mm) 15...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included. Fits Harken 13mm High Beam...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.Fits Harken #2707 and 2709 ...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin® with Delrin® b...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...