DAVEY

Davey Gunmetal Bronze Belaying Pins - O.A. Length 8-3/4" (222mm); Stem Length 5" (125mm); Stem Ø 5/8" (16mm)

Large Ash Blocks Built to the same high standard, and similar construction method, as our smaller ash blocks but with larger ash shells in relatio...

Polished cast gunmetal bronze boat hook ends. For attaching to wooden boat hook poles. SPECIFICATIONS: DAV1000/GM - Length: 6" (150mm)Stave Diamete...

Chain / Shroud Plates - Polished gunmetal bronze. To ensure correct positioning of the plates to the vessel, they are supplied undrilled, thus allo...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through cockpit coamings. SMALL Max Rope Size: 8mm Over...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through coamings. The two sheaved variety is designed for...

Heavy cast bronze cowl vents with flush bronze deck plates, produced in the UK by traditional methods. The outer surface is polished chrome and the...

DETAILS Like all Davey wood blocks, this block features:Bindings: Heavy gauge stainless steel.Sheaves: BrassBearings: Roller bearings.Shell: High q...

DETAILS Like all Davey wood blocks, this block features:Bindings: Heavy gauge stainless steel.Sheaves: BrassBearings: Roller bearings.Shell: High q...

DETAILS - Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can...

Deck lights are a great way to get natural light down below and lighten up even the darkest spaces. The round glass lens concentrates sunlight and ...

Deck lights are a great way to get natural light down below and lighten up even the darkest spaces. The round glass lens concentrates sunlight and ...

Davey and Co traditional brass interior light with energy efficient LED bulb and switch. Made from solid cast brass and with solid glass lens. High...

A traditional brass engine control lever, perfect to compliment the style of traditional launches and workboats. Move handle back and forth to cont...

Angled Bow fairleads in gunmetal bronze. Available in 3 different lengths and port or starboard configurations. Made in the UK by Davey and co.

Through Bulwark Fairleads - These fairleads are cast in gunmetal in two equal halves and supplied undrilled. For screw fixing the holes should be d...

Davey Deadeye/Fairlead - Sheet lead - Lignum Vitae timber bullseyes in a Polished bronze screw down saddle. 12mm Fairlead Fairlead Eye Diameter: 1...

Straight fairleads in gunmetal bronze with lip to protect gunnel or toerail. Available in 3 different lengths. Made in the UK by Davey and Co.SPECI...

Gunmetal bronze flagpole sockets with built in cleat for on deck mounting. Raked at a 20 degree angle.

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Half Cowl Vent - Left or Right Hand - Cast from gunmetal bronze, these vents are designed to fit to the sides of engine compartments. They are usua...

Highfields Pattern Running Backstay Lever - Gunmetal channel section, polished outside and pivoted with two side bolts leaving the channel clear fo...

Mast or bowsprit bands cast in gunmetal bronze with 4 eyes. Made by Davey and Co London. Available in several sizes to suit different mast diameters.

A new development of this classic light now means that it can be wired directly to 12v/24v DC.  Cast in bronze with a sand blast finish. The base o...

Mast Head Navigation Light - Cast in brass navigation lights approved by the Italian RINA for boats up to 12 Metres. They are supplied complete wit...

Oakum is a twisted Jute packing material impreganted with stockholm tar for water resistance. Used as a heavy duty caulking material on traditional...

Polished brass skylight lift - Heavy duty lift utilising a tee bar screw.

6" Arm only - Polished brass to fit smoke shade. Designed to suit the Davey Gem Gimbal Lamp (0307). Smoke Shade is recommended to protect the deck ...

Classic Stig Larsen Stormglass by E.S. Sorensen. Beautiful highly polished brass finish makes this a great addition for any boat or home. Used to h...

Spinnaker Pole End in Polished gunmetal bronze - A stylish end socket to fit a wooden spar. Sprung piston end. SPINNAKER POLE END SIZING SMALL - 10...

Stem head Fitting cast in polished gunmetal bronze. This strong stem head fitting takes the load down the front of the stem and is suitable for cra...

Turn Button Hasp - suitable for skylight closures, lockers and many other applications.

Spun Cowl Ventilator - Manufactured from spun brass with polished bronze base and blanking cap. Polished brass exterior and white painted interior....

Wykeham Martin Furling GearIn continuous production for over 100 years, this traditionalfurling gear has been successfully fitted to thousands of b...