Tracks and Cars

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle...

Harken® small boat 22mm spinnaker pole cars feature recirculating ball bearings to permit adjustment under any load. They roll freely on low-beam t...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

Stainless steel Big Boat couplers join two cars to form high-load assemblies. The high load 752 couplers fit 32MM T3201B and T3201B.HL cars. Use 75...

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle...

These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 140 ft²...

Endstop kit for System C 32mm mast tracks on Selden spars. Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctit...

Endstops are designed to absorb shock loads and should be installed when end controls are not used. Length (mm) 55 mm Length (in) 2 3/16 in Width (...

Endstop for System A 22mm battcar track, fits on to wide flat mast grooves. Use screwpin endstop to easily remove cars and mainsail. Order one kit....

Fixed endstop for Harken 27mm mast track to fit to flat mast grooves. Endstops absorb shock loads and prevent damage to the car. Kits include endst...

Fixed endstop for Harken 27mm mast track to fit to round mast grooves. Endstops absorb shock loads and prevent damage to the car. Kits include ends...

Hardcoat-anodized aluminum endstops absorb shock loads and prevent damage to the car. Use with 1706 low-beam ball bearing pinstop track. Length (mm...

Hardcoat-anodized aluminum endstops absorb shock loads and prevent damage to the car. High-load stainless steel diamond-shaped padeye for block att...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22 mm High Beam Ball Bearing tracks. Fasteners (mm) 5 mm Fasteners ...

T-Track genoa lead cars are used where frequent lead adjustments are not required. T-Track cars have an integral pinstop to lock the car into posit...

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

Aluminum web-on headboard plates are easy for sailmakers to install. Plates have radiused edges to protect the sail and fit 1 in (25 mm) webbing st...

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded...

Harken Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 13mm Micro track is suited to din...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Micro CB Cars fit 13mm track #2...

End Stop for System AA 13mm low beam mast track. Use screwpin endstop to easily remove cars and mainsail. Order one kit. Track end length (mm) 15...

Endstops absorb shock loads. Use the built-in groove to deadend 2:1 control line. Sold in pairs. Fasteners not included.Fits Harken #2707 and 2709 ...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m) 3.6 m Width (mm) 42 mm Width ...

Harken Midrange ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in control block...

Harken Midrange ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in control block...

Harken Midrange High Load ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in con...

Harken Midrange ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in control block...

Harken Midrange High Load ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in con...

Harken Midrange ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Built in control block...

Harken Stand-up toggles hold blocks upright on travellers. Fits Harken Midrange 27mm cars. Mainsheet block pin Ø (mm) 6, 8 mm Mainsheet block pin Ø...

Hardcoat-anodized aluminum pinstop end controls limit car movement on the track. Bumpers absorb shock loads and prevent damage to the car. Fits Har...

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Control tangs mount on Small Boat cars to attach control blocks for 2:1 to 4:1 purchases. Come in pairs. Fits Harken Small Boat 22mm traveller cars...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....

For mounting Harken System A mast track on round mast grooves. Order one kit per track section. Mounting slug length (mm) 19 mm Mounting slug w...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite®, 2 slug mounts. For mounting to round mast grooves. Wei...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite®, 2 slug mounts. For mounting to wide flat mast grooves.

For mounting Harken System A mast track on round mast grooves. Order one kit per track section. Mounting slug length (mm) 19 mm Mounting slug we...

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded...

Mounting kit for 13mm mast track on round mast groove. Order one kit per track section. Mounting slug length (mm) 19 mm Mounting slug weight (g)...

A Harken Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded....