Spars & Rigging

Designed for cockpit-mounted cruising installations and similar setups, the 1628 and 1629 cars with Carbo-Cams allow traveller control cleating at ...

Stand-up toggles hold blocks upright on travellers. Fits harken Big Boat 32mm traveller cars. Mainsheet block pin Ø (mm) 8 mm Mainsheet block pin Ø...

Self-contained sheaves are designed for sailors to use in custom applications. 2760 sheaves are Delrin® acetal resin with Delrin® ball bearings. Th...

Endstops are designed to absorb shock loads and should be installed when end controls are not used. Length (mm) 55 mm Length (in) 2 3/16 in Width (...

Hardcoat-anodized aluminum endstops absorb shock loads and prevent damage to the car. Use with 1706 low-beam ball bearing pinstop track. Length (mm...

Hardcoat-anodized aluminum endstops absorb shock loads and prevent damage to the car. High-load stainless steel diamond-shaped padeye for block att...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22 mm High Beam Ball Bearing tracks. Fasteners (mm) 5 mm Fasteners ...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22mm ball bearing low beam track #2720. Fasteners (mm) 5 mm Fastene...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22mm Small Boat Tracks. Fasteners (mm) 5 mm Fasteners (in) #10 FH i...

When end controls are not used, add endstops to absorb shock loads. Fits Harken 22mm High Beam Tracks. Fasteners (mm) 5 mm Fasteners (in) #10 FH in...

Lazy Jacks contain mainsails while reefing and dousing allowing the mainsail to be raised and lowered from the cockpit without going on deck. They ...

Lazy Jacks contain mainsails while reefing and dousing allowing the mainsail to be raised and lowered from the cockpit without going on deck. They ...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin® with Delrin® b...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Length (m) 3.6 m Width (mm) 42 mm Width ...

Harken Stand-up toggles hold blocks upright on travellers. Fits Harken Midrange 27mm cars. Mainsheet block pin Ø (mm) 6, 8 mm Mainsheet block pin Ø...

Hardcoat-anodized aluminum pinstop end controls limit car movement on the track. Bumpers absorb shock loads and prevent damage to the car. Fits Har...

Harken R27 high beam end stops. Endstops are designed to absorb shock loads and should be installed when end controls are not used. Use with R27HB ...

Harken Midrange 27mm ball bearing track for retrofit installations requiring a 4 inch (102mm) hole spacing. Track is extruded from high-grade 6061-...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin with Delrin® ba...

Self-contained sheaves are designed for sailors to use in custom applications. Captive ball bearings make installation simple. Aluminium construct...

Self-contained sheaves are designed for sailors to use in custom applications. Captive ball bearings make installation simple. Sheave Ø (mm) 51 m...

Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of hardcoat-anodized, PTFE-impr...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin® with Delrin® b...

Splice links join track and keep it aligned during installation. Use to join Harken R27 midrange low beam track.