Spars & Rigging

Harken Stand-up toggles hold blocks upright on travellers. Fits Harken Midrange 27mm cars. Mainsheet block pin Ø (mm) 6, 8 mm Mainsheet block pin Ø...

Hardcoat-anodized aluminum pinstop end controls limit car movement on the track. Bumpers absorb shock loads and prevent damage to the car. Fits Har...

Harken R27 high beam end stops. Endstops are designed to absorb shock loads and should be installed when end controls are not used. Use with R27HB ...

Harken Midrange 27mm ball bearing track for retrofit installations requiring a 4 inch (102mm) hole spacing. Track is extruded from high-grade 6061-...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin with Delrin® ba...

Self-contained sheaves are designed for sailors to use in custom applications. Captive ball bearings make installation simple. Aluminium construct...

Self-contained sheaves are designed for sailors to use in custom applications. Captive ball bearings make installation simple. Sheave Ø (mm) 51 m...

Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of hardcoat-anodized, PTFE-impr...

Self-contained sheaves are designed for sailors to use in custom applications. The Micro, Bullet, and Big Bullet sheaves are Delrin® with Delrin® b...

Splice links join track and keep it aligned during installation. Use to join Harken R27 midrange low beam track.

Use 1849 risers for mid-boom travellers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight...

When end control assemblies are used, trim caps finish track ends.Fits Harken 27mm midrange High Beam tracks. Sold in pairs. Footnote Trim caps not...

When end control assemblies are used, trim caps finish track ends. Fits Harken 27mm midrange tracks. Sold in pairs. Use with track 1602, 1616, 1617...

Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of hardcoat-anodized, PTFE-impr...

These adapters upgrade many ball bearing CB traveller cars to race-ready windward sheeting cars. Adapters also fit several older non-CB cars. They ...

Homer Folding Step 316 Stainless Steel. Can be used as a folding mast step as well as many other uses on boats, campervans and RVs. Base Size: 110 ...

Homer Sail Track Stop Internal portion of stop dimensions: • Length: 22mm •ø 13mm •Weight 41gr

Homer shackle spanner 316 stainless steel. Suits most shackle sizes. Length: 112mm Weight: 22g

Spreader Boots (PVC Anti Chafe Covers) White Plastic Spreader Protector. These protective covers protect the sails from damage and chaffing from co...

Homer Eye to Eye Open body Turnbuckle.Aisi 316 stainless steel.Available in 3 sizes.Not Load Rated SPECIFICATIONS5mm Turnbuckle:- Thread Diameter: ...

Homer Jaw to Jaw Open body Turnbuckle. Available in three sizes. AISI 316 Stainless Steel Not Load Rated Specifications:5mm Turnbuckle:- Thread Dia...

Safety helmet for work at height, yacht rigging, industrial activities and building construction. Lightweight helmet, comfortable and well ventil...

 Get the most out of your sailboat with the Loos PT series of gauges. These gauges are designed for setting the proper tension in the standing rigg...

Marlow hot knife for cutting and heat-sealing ropes in one stroke. Use in conjunction with Marlow Tape for a perfect clean, neat cut that also prev...

Splicing needles used for MARLOWBRAID (quick splice), D2 (covered Dyneema splice) and can be used on D12 (12 strand Dyneema splice). DIMENSIONS: Sm...

Mast or bowsprit bands cast in gunmetal bronze with 4 eyes. Made by Davey and Co London. Available in several sizes to suit different mast diameters.

How many yachtsmen have struggled to reach the gooseneck, the highest reef point or the top of the sail cover by attempting to balance on a halyard...

Nylon shackle for holding sail slugs onto mainsail. Screw attachment. DIMENSIONS External Length: 31mm External Width: 13mm Internal Length: 17mm I...

PNP Nylon sail slug to suit Selden 12mm track section. •Suitable for Keelboat, Dinghy and Trailerable yacht mainsails •Impact resistant, U.V. stab...

High quality general purpose PVC tape manufactured to BS3924. Flame retardant (will self-extinguish if it catches fire). Good for electrical insula...

Bronze barrell only for closed body rigging screws. Chrome plated bronze  

Closed body rigging screws. Chrome plated bronze body with 316 stainless steel ends. Available in several thread sizes with different end options....

Riley Boom Block Hanger. Suitable for attaching mainsheet blocks to booms. Suitable for booms 70-80mm diameter. DIMENSIONS: Overall Length: 75mm...

Riley Mini Shackle Key & Screwdriver This full featured but compact unit was designed with the user in mind. The contoured shape, moulded from ...

Riley bronze sheave suitable for rope or wire. Bronze provides low friction turning and great wear resistance. DIMENSIONS: Outside Diameter: 38mm ...

Riley chrome plated bronze sheave suitable for rope or wire. Bronze provides low friction turning and great wear resistance. DIMENSIONS: Outside D...