Sailing

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded...

A Harken® Battcar system along with full-length battens helps raise, douse, and reef with ease and acts as extra crew if you’re sailing shorthanded...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3853 track mounts to mast using a unique...

Screwpin endstop kit for System C 32mm track mounted on flat mast groove. Use pinstop endstop to easily remove cars and mainsail. Order one kit onl...

Mounting kit for System C 32mm mast track. Mounting kit slugs are for flat mast grooves. Order one kit per track section. Mounting slug length (m...

Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. ...

Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

ThIS simple and lightweight tiller extension design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort. The ...

The base cover snaps off to remove tiller extension. Weight (g) 5 g Weight (oz) 0.18 oz Length (mm) 44 mm Length (in) 1 3/4 in Width (mm) 22 m...

Stand-up toggles hold blocks upright on travellers. Stand-up toggles with control tangs allow attachment of control blocks. Fits Harken Small Boat ...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Midrange track is predrilled with ho...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. All Big Boat track is predrilled with ho...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track ...

Splice links join track and keep it aligned during installation. Use to join Harken R27 midrange low beam track.

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. CB (Captive Ball) high-beam variable h...

Use 1849 risers for mid-boom travellers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam 22mm variable hole spacing t...

Harken 22mm Small Boat High Beam Track. Can be used to span gaps between cockpit seats or over tillers. Suitable for keelboats up to 8mTrack is ext...

Harken 27mm mast track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. 3844 track mounts to ma...

Mounting kit for Harken System B 27mm mast track into round mast grooves. Order one kit per track section. Mounting slug length (mm) 22 mm Mount...

Mounting kit for Harken System B 27mm mast track into wide flat mast grooves. Order one kit per track section. Mounting slug length (mm) 22 mm M...

When end control assemblies are used, trim caps finish track ends.Fits Harken 27mm midrange High Beam tracks. Sold in pairs. Footnote Trim caps not...

When end control assemblies are used, trim caps finish track ends. Fits Harken 27mm midrange tracks. Sold in pairs. Use with track 1602, 1616, 1617...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Trigger cam cleats allow loaded lines to be e...

The cam mounting bracket attaches the Trigger cleat to 76 mm (3.00 in) low-profile triples. It fits the 152 and 411. Height (mm) 6 mm Height (in)...

When end control assemblies are used, trim caps finish track ends. Fits Harken R32 High Beam Track. Use with track 3154, 3155, 3159, 3162, R32HB ...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Over-the-top blocks lead lines aft over cabin houses, coamings, and splashguards. Sheave Ø (mm) 57 mm Sheave Ø (in) 2 1/4 in Length (mm) 83 mm ...

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, comp...

The 1598 U-adaptor allows blocks with up to 15 mm (19/32") posts to be attached to swivel bases or to other blocks with 15 mm (19/32") posts. Fits ...

The 463 U-Adaptor adapts 75 mm Carbo single blocks to swivel bases. Height (mm) 46 mm Weight (g) 136 g Minimum line Ø (mm) 3 mm Maximum line Ø ...

The UniPower is a single-speed winch that combines the advantages of a low-profile manual winch with the power of a 12- or 24-volt, low-amp-draw mo...