Sailing

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Silver Anodi...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

Rivet-on pulley block for use with CL248. The becket holds one end of the rope so that a 6:1 advantage can be rigged. The curved base allows fittin...

The roller fairlead allows ropes to enter the cleat from above. Hard anodised finish. ROPE SIZE 3-6MM

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey Hardcoat anodizing ROPE SIZE: 3-6MM BASE DI...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in standard silver anodising. ROPE SIZE: 3-6MM BAS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

With the CL215 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

Aids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Use with the Harken Reflex torsion cable. For each additional sail, order these components separately so you can easily switch furled sails using...

Use with the Harken Reflex torsion cable. For each additional sail, order these components separately so you can easily switch furled sails using...

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

GENOA SLIDE BLOCK - SWIVEL & RUBBER HINGED, SUIT 1 1/4" 32MM TRACK 60mm x 19mm (2 3/8" x 3/4") Delrin Sheave Genoa Lead Slide Block, Suit 32MM ...

Cleveco Chrome Plated Bronze Track End Stop Suit 32 x 6mm (1 1/4" x 1/4") T- Track Product Code: MW128X

Cleveco stainless steel backing plates for saddles. Ideal for linking traveller cars or various other uses.

Cleveco Keeler Block, double 60x19mm delrin sheave, swivel top. A very sturdy and long lasting block. Made in NZ. Sheave specially designed for st...

Ideal for smaller keelers and cruising boats. A very sturdy and long lasting block. Made in NZ. 25 x 16mm (1" x 5/8") Single Sheave Ferrule Top BR...

Cleveco Keeler Block, single 60x19mm delrin sheve, swivel top. A very sturdy and long lasting block. Made in NZ. Wide sheave specially designed fo...

Cleveco Exit box. Stainless steel body with Delrin sheave. Made in NZ. 38 x 8mm (1 1/2" x 5/16") Single Delrin Sheave Exit Box Flat Surface Mountin...

CLEVECO STAINLESS STEEL LINK PLATES Ideal for linking traveller cars or various other uses.

Cleveco Stainless Steel safety catch for holding dinghy rudders onto the transom gudgeons.DIMENSIONS:Overall Length: 102mmMounting Side Length: 38m...

Made from reinforced nylon the W14 is the most suitable winch about for the use as a sheet winch on trailer sailors up to 6m (20) and center boarde...

Use with the Harken Reflex furling system. The quick-release modular T-fitting allows the bottom unit to handle code zero as well as asymmetric sai...

Use with the Harken Reflex furling system. The quick-release modular T-fitting allows the bottom unit to handle code zero as well as asymmetric sai...

Replacement Acetal Composite Sheave only for Spinlock T50 deck organiser. Can also be used as a general purpose sheave. DIMENSIONS: Overall Di...

Control line calibration strip. Waterproof PVC with sticky back. Attach to deck and use to achieve repeatable sail trim settings.   250mm long

Copper talurits for permanently crimping loops or eyes into the end of wire ropes. Can be used with hand crimping tools or hydraulic press. Availa...

It has long been known that the addition of a spray hood inside a lifejacket can significantly enhance the wearer’s safety. It increases visibility...

It has long been known that the addition of a spray hood inside a lifejacket can significantly enhance the wearer’s safety. It increases visibility...

Stainless Steel 316 grade D Rings. Minimum breaking loads:6mm Rings: 1800kg

DETAILS Like all Davey wood blocks, this block features:Bindings: Heavy gauge stainless steel.Sheaves: BrassBearings: Roller bearings.Shell: High q...

Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can be found ...

DETAILS - Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can...

Nylon deck bush for leading lines through decks, bulkheads or coamings. Available in black. DIMENSIONS length: 57mm Width: 38mm Thickness: 12mm Dep...

Deck Eye with 11mm hole for leading lines through or lashing lightly loaded objects. DIMENSIONS: Length: 34mm Width: 22 Height: 25mm Hole Size: 10...

Cleveco Keeler block, 48x13mm delrin sheave, ferrule top & becket. Ideal for smaller keelers and cruising boats. A very sturdy and long lasting...