Sailing

Spinlock compact stanchion furling lead bullseye. Ideal for running furling lines aft to the cockpit.  - Compact and cost effective furling line gu...

Spinlock compact stanchion furling lead bullseye. Ideal for running furling lines aft to the cockpit.  - Compact and cost effective furling line gu...

Replacement spring arm kit for Spinlock XA rope clutches.

Replacement or upgrade base for Spinlock XA or XAS clutches. Two versions available for line diameters 4mm - 8mm and 6mm - 12mm. XAS Base 4mm - 8mm...

Replacement handle for Spinlock XAS Rope clutches.

The complete service kit for your Spinlock XAS rope clutches (6mm - 12mm).  - The complete service kit for XAS clutches - Kit includes Cam, Side Fa...

Replacement Side fairings for Spinlock XAS rope clutches. Sold as a pair of left and right hand sides.

Spinlock XAS rope clutches. An affordable multi role clutch with excellent performance across a wide rope range Perfect for racing yachts up to to ...

Side mounting kit for old style Spinlock XT and XC rope clutches.

Service kit for Spinlock XTS rope clutches. - Complete service kit for Spinlock XTS rope clutches- Includes replacement cam (CAM-0814), replacement...

Replacement side fairings for Spinlock XTS rope clutches. Sold as a pair of left and right side fairings.

Side mounting kit for Spinlock XTS rope clutches.  - Side mounting kit for XTS single clutches - Often the best solution for spars, side decks and ...

Spinlock XTS rope clutches. Specified as standard on production yachts worldwide and the choice of many racing yachts inshore and offshore.  - Mid ...

Moulding kit replacement for Spinlock XX0812 rope clutches (2011 onwards). - Complete end moulding kit replacement for XX0812 (2011 onwards).

Spinlock XX rope clutch service kit including jaw set and mouldings.  - Service kit for Spinlock XX0812 - Includes jaw set and moulding - Use for u...

The XX Range of clutches holds loads 50% higher than any conventional clutch, with smooth and controlled release. The only secure clutch solution f...

The XX Range of clutches holds loads 50% higher than any conventional clutch, with smooth and controlled release. The only secure clutch solution f...

the Spinlock XXC Meets growing demand for an ultra high performance rope Clutch. The carbon fibre reinforced body reduces weight by 15% compared to...

Spinnaker Pole End in Polished gunmetal bronze - A stylish end socket to fit a wooden spar. Sprung piston end. SPINNAKER POLE END SIZING SMALL - 10...

Homer Stainless Steel split rings. Perfect for securing clevis pins while still being easy to remove.

Kong Stainless steel carabiner with Auto Block sleeve. Designed to offer a wide gate opening and a high tensile strength. The particular D shape pr...

Riley Clevis Pin Stay Adjuster Stainless Steel. 89mm to 127mm adjustment range with direct end fastening by means of forked end to chainplates or ...

Riley Vernier Stay Adjuster Stainless Steel. Allows 50mm adjustments in 3mm increments. Breaking Strain: 800kg DIMENSIONS: Min Eye-Eye Length: ...

Riley Extra Long Vernier Stay Adjuster Stainless Steel. Allows 50mm adjustments in 3mm increments. Strap can be cut shorter if necessary. Ideal fo...

White Nylon push in bushes ideal for leading lines through decks or bulkheads. Available in two sizes. SMALL BUSH Flange Diameter: 22mm Cutout Di...

Carbon steel carabiner with Auto Block sleeve. The X-Large is designed to offer a wide gate opening and a high tensile strength. The particular D s...

Cleveco Ferrule Top Steering Pulley stainless steel with delrin sheaves 51 x 8mm (2" x 5/16") Single Sheave Breaking Strain: 454kgs Weight: 43g

Cleveco Ferrule Top Steering Pulley stainless steel with double delrin sheaves 51 x 8mm (2" x 5/16") Double Sheave Breaking Strain 907kgs Weight: 71g

Cleveco Double Steering Pulley. Stainless Steel with Delrin sheave. 38 x 8mm (1 1/2" x 5/16") Double Sheaves Ferrule Top Steering Pulley Breaking S...

Cleveco Steering Pulley. Stainless Steel with Delrin sheave. 38 x 8mm (1 1/2" x 5/16") Single Sheave Ferrule Top Steering Pulley Breaking Strain: 4...

Cleveco Single Sheave Upright Steering Pulley Also Useful As Halyard Block In Mast Head 51 x 8mm (2" x 5/16") Breaking Strain: 816kgs Weight: 43g

World’s First Sunlight Adaptive Binocular All the action without a glimmer of glare. Exclusive AutoBright™ optics offset dazzling light automatical...

Stem head Fitting cast in polished gunmetal bronze. Suitable for dinghies up to around 12 foot. LENGTH: 110MM WIDTH: 20MM

Stern Bracket With 8 x 63mm (5/16" x 2 1/2") Pin With 5mm (3/16") Fixing Holes Weight: 64g

Replacement strop for both models of Spinlock BRS spinnaker lockoff blocks. ?Webbing strop for attaching the BRS Spinnaker block to a toe rail or ...

Few dinghies can sail fast enough to windward particularly in rough weather or half full of water, for a wedge type bailer to operate well. Based ...

tTraditional stainless steel splicing fids with a wooden handle, swedish fids are used for MULTIPLAIT, 3 strand and MARLOWBRAID splicing (in conjun...

Upper swivel assembly for the Harken Reflex Unit 1 furler.

Marlows traditional tarred waterproof hemp twine comes in approx. 1.1mm or 1.9mm diameter. Use for whipping wire splices, mooring posts, heavy duty...

The Speedy Stitcher Sewing Awl, is a hand tool that can be used to sew any heavy material. It’s a handy tool to have on the boat and around the hou...

Seasure quick release tiller extension universal joints. Made from flexible yet durable PVC for articulation in any direction. The rope core increa...

Classic Cruiser tiller lock - Midshipman Suitable for any tiller steered yacht or sports boat. Simple mechanism allows tiller to be set and adjus...

Toledo Wire crimping hand tools for copper or aluminium talurit crimps. Ideal for swaging loops on to the end of wire ropes. •Designed to compress ...

Use with the Harken Reflex furling system. Quick-release modular T-fitting allows single drive unit to handle multiple sails. Head and tack swivels...

Use with the Harken Reflex furling system. Quick-release modular T-fitting allows single drive unit to handle multiple sails. Head and tack swivels...

Top foil to fit headstay For use with Harken ESP Unit 0 furler

Top foil for Harken ESP Unit 1 furler

Top Foil section to fit Harken ESP Unit 2 furler.