Skip to content

Rod & Flag Holders

Filters

$
$
  • FLAG POLE SOCKET RAKED BRONZE DAV9571/GM

    FLAG POLE SOCKET RAKED BRONZE

    $135.48 - $178.57
    $135.48 - $178.57
    $135.48 - $178.57
    $135.48
    Low stock

    Gunmetal bronze flagpole sockets for on deck mounting. Raked at a 20 degree angle.

  • FLAG SOCKET RAKED CLEAT BRONZE DAV9575

    FLAG SOCKET RAKED CLEAT BRONZE

    $228.67 - $336.17
    $228.67 - $336.17
    $228.67 - $336.17
    $228.67
    Low stock

    Gunmetal bronze flagpole sockets with built in cleat for on deck mounting. Raked at a 20 degree angle.

  • HOMER CLAMP ON ROD HOLDER S/S HOM9865

    HOMER CLAMP ON ROD HOLDER S/S

    $92.71 - $92.71
    $92.71
    $92.71 - $92.71
    $92.71
    In stock

    Homer Clamp on Rod Holder cast in 316 Stainless Steel. Clamps onto 22mm (7/8") or 25mm (1") rails. Mountable vertical or horizontal Length: 228mm...

    View full details
  • HOMER FLAG POLE CLEAT S/S HOM45

    HOMER FLAG POLE CLEAT S/S

    $2.35 - $3.99
    $2.35 - $3.99
    $2.35 - $3.99
    $2.35
    Low stock

    Homer Flag Pole Cleat 304 Stainless steel. Ideal for flag poles and blinds.

  • HOMER FLAG POLE SOCKET S/S

    HOMER FLAG POLE SOCKET S/S

    $24.73 - $45.48
    $24.73 - $45.48
    $24.73 - $45.48
    $24.73
    Low stock

    Homer Flag Pole Socket with a 10 degree Angle. Cast in 316 Stainless Steel. Available in sizes to fit 19mm, 25mm and 32mm diameter flag poles.

  • HOMER ROD HOLDER SIDE MOUNT 34 S/S HOM9846

    HOMER ROD HOLDER SIDE MOUNT 304 S/S

    $43.29 - $43.29
    $43.29
    $43.29 - $43.29
    $43.29
    In stock

    Homer Side Mount Rod Holder 304 Stainless Steel with black plastic insert. Comes with straps for side mounting to seat or coaming. Length: 230mm (...

    View full details

  • ROD HOLDER DECK MOUNT CP BRASS

    $45.02 - $45.02
    $45.02
    $45.02 - $45.02
    $45.02
    Low stock

    A high quality chrome-plated brass fishing rod holder. Inset deck mounting (round). Made in NZ. Limited stocks available, only while stocks last.

  • ROD HOLDER FLUSH MOUNT NYLON HOM5467-WH

    ROD HOLDER FLUSH MOUNT NYLON

    $4.78 - $4.78
    $4.78
    $4.78 - $4.78
    $4.78
    In stock

    An economical angled plastic rod holder. Made from tough reinforced nylon. Colour: White. DIMENSIONS: Depth: 250mm Tube Outside Diameter: 50mm ...

    View full details
  • ROD HOLDER FLUSH NARROW NYLON HOM5466

    ROD HOLDER FLUSH NARROW NYLON

    $7.18 - $7.18
    $7.18
    $7.18 - $7.18
    $7.18
    Low stock

    An economical angled plastic rod holder with narrow flange designed for mounting on narrow coamings. Made from tough reinforced nylon. DIMENSIONS:...

    View full details
  • ROD HOLDER FLUSH RECTANGE FLANGE 316 S/S HOM9859

    ROD HOLDER FLUSH RECTANGE FLANGE 316 S/S

    $51.20 - $51.20
    $51.20
    $51.20 - $51.20
    $51.20
    In stock

    Homer Flush Mount Rod Holder. This economical holder is stamped in 304 Stainless Steel 30 Degree Angle with a soft pvc flange gasket and integral ...

    View full details
  • ROD HOLDER FLUSH ROUND FLANGE 316 S/S HOM9851

    ROD HOLDER FLUSH ROUND FLANGE 316 S/S

    $68.39 - $68.39
    $68.39
    $68.39 - $68.39
    $68.39
    In stock

    Homer Flush Mount Rod Holder cast in 316 Stainless Steel. 30 Degree Angle with a soft pvc flange gasket and integral flip-up cap. Length: 220mm Ini...

    View full details
  • ROD STORAGE HOLDER S/S & PLASTIC HOM9951

    ROD STORAGE HOLDER S/S & PLASTIC

    $33.28 - $33.28
    $33.28
    $33.28 - $33.28
    $33.28
    Low stock

    Homer Rod Holder with corrosion resistant stainless steel spring to prevent rod tip from accidentally coming out - 316 Stainless Steel. Mount to d...

    View full details

  • TUBE HOLDER CLIPS NYLON

    $1.53 - $4.24
    $1.53 - $4.24
    $1.53 - $4.24
    $1.53
    In stock

    Nylon Tube Clips. Available in a variety of different tube sizes. Great for holding pipes, rods, boat hooks, tiller extensions and many other uses....

    View full details