HARKEN ACCESSORIES

The 494 and 495 Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keep...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop ca...

Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays ...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. A (mm...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. A (mm) ...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. LENGTH...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Height...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. LENGTH...

Use 285 to ease genoas over lifelines or past shroudsand to help large roach mainsails clear backstays.

Stand-up bases allow a wide variety of blocks to be held upright, swivel freely, or pivot so lines have a fairlead under load. The ball-and-socket ...

Stand-up bases allow a wide variety of blocks to be held upright, swivel freely, or pivot so lines have a fairlead under load. Use the 1634 stand-u...

The 061 stanchion mount base attaches blocks to 7/8 in or 1 in (22 or 25 mm) stanchions or pulpits and is often used to lead furling lines to the c...

The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Mounted on a swivel...

The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Mounted on a swivel...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

Stainless steel tack adapter tangs are used to adapt pin diameters on headstays to the standard clevis pin size that comes on the Harken Small Boat...

Use 1849 risers for mid-boom travellers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Trigger cam cleats allow loaded lines to be e...

The cam mounting bracket attaches the Trigger cleat to 76 mm (3.00 in) low-profile triples. It fits the 152 and 411. Height (mm) 6 mm Height (in)...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wir...

Wire cam leads maintain a low profile while holding the line close to the cleat. Fits Harken Standard and Micro cam cleats.  Specifications S...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced Carbo Cam cleat and wir...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. Kit includes hardcoat-anodized aluminum Cam-Matic® cle...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...