Hardware

Closed Stainless Steel Ring Rowlocks with plastic covers - 9mm shaft Sold In Pairs

Create a non-damaging soft rubrail or rubbing strip on the gunnel of your boat.  Gunnel Guard Soft but tough two piece PVC fender strip helps prev...

The Little Grippa rope cleat can be used with either conventional braided rope or shock cords. Ideal for all kinds of uses including tie downs, sai...

Nothing lives up to our slogan better than Little Grippa - whatever you’re about Little Grippa bungy tie down is the product for you. It’s got so m...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Tenob plastic scoop. For ventilation or draining of compartments. Available in black Dimensions: 95mm x 78mm

Fosters Drain Plugs. Light weight and cost effective. Ideal for small dinghies, canoes and kayaks. Replacement flanges and bungs also available. Fl...

Stainless steel general purpose cleats. Ideal for flag poles, blinds, and many other uses.

Replacement washer only for Tenob DEC750 bungs.

Tenob medium nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. ...

Tenob large nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. F...

Tenob nylon Bodic hook. Easily tied to the end of shock cord and bung cord to create a quick and easy tie down of any length. Length: 50mm Throat ...

Tenob nylon outboard motor well drain. 85mm long x 21mm diameter.

Tenob nylon drain bung 17mm fine thread. Includes rubber washer for optimum seal. Stainless steel clips help prevent bung from being lost. A high q...

Burgee Nylon Transom drain plug (bung) complete. Colour - Black. Medium pitch flat topped thread. Base (circular shape with flat across bottom) has...

Nylon horn cleats. Strong, light and affordable. 75mm & 100mm cleats are glass reinforced nylon.

Handrail mid bracket to suit 19mm tube. Polished bronze or chrome plated finish. Base width 45mm  Base length 60mm Total hight 53mm  Made in NZ

Gunmetal bronze flagpole sockets with built in cleat for on deck mounting. Raked at a 20 degree angle.

Gunmetal bronze flagpole sockets for on deck mounting. Raked at a 20 degree angle.

Brass Name Plates to label deck fillers. Text available in either Diesel or Water

Polished Gunmetal leads to pass sheets and control lines along side decks or through cockpit comings etc. I.D.Ø16mm ; Width O.A. 50mm; Height O.A. ...

Polished Gunmetal leads to pass sheets and control lines along side decks or through cockpit comings etc. I.D.Ø16mm ; Width O.A. 58mm; Height O.A. ...

Davey Deadeye/Fairlead - Sheet lead - Lignum Vitae timber bullseyes in a Polished bronze screw down saddle. 12mm Fairlead Fairlead Eye Diameter: 1...

Davey Lignum Vitae timber bullseyes secured with phosphor bronze U-bolts. 12mm Fairlead Bronze U-Bolt Size: 6mm x 44mm Fairlead Eye diameter: 12m...

Hasp & Staple - Heavy Duty cast in brass and polished, these hasps & staples should not be confused with standard pressed or lightweight di...

Turn Button Hasp - suitable for skylight closures, lockers and many other applications.

A high quality gunmetal bronze hinge designed specifically for skylights on classic yachts. Curved centre plate to fit skylight ridge and two strap...

Polished brass skylight lift - Heavy duty lift utilising a tee bar screw. Available in two different lengths.

Heavy cast brass, polished grill vent. Diameter:160mm

Cast Cowl Ventilator Available in polished brass or chrome finish, these cast vents are supplied with matching raised deck fittings. Blanking caps ...

Polished brass or chrome plated dorade vent cowl with optional blanking caps. Made from pressed brass by Davey and Co London. Internal Diameter: ...

Through Bulwark Fairleads - These fairleads are cast in gunmetal in two equal halves and supplied undrilled. For screw fixing the holes should be d...

Closed Hand Rail Stanchion - Cast in brass. Rail Ø 1-1/4" (32mm); Base Ø 2-1/4" (58mm); Height 2-3/4" (70mm); Fastenings 4 x #10

Angled Bow fairleads in gunmetal bronze. Available in 3 different lengths and port or starboard configurations. Made in the UK by Davey and co.

Straight fairleads in gunmetal bronze with lip to protect gunnel or toerail. Available in 3 different lengths. Made in the UK by Davey and co.

Closed Fairlead cast in Gun Metal Bronze. Available in 3 lengths.

Cleveco U bolts with deck collars. Stainless Steel

Cleveco U bolts with deck plate. Stainless Steel

Bronze, Chrome Plated Bronze & Stainless Steel Separating Hinges (Pair) Separating hinges with spring loaded pins in forged bronze or stainless...

Bronze Toerail Fairlead. Polished bronze or chrome plated finish Mooring fairlead suitable for boats from 30 to 50 feet. Can be mounted on port or...

Solid cast manganese bronze eye bolts. Ideal for many purposes on traditional vessels.

Cleveco Handle general purpose Stainless Steel. Made in NZ. Dimensions: Overall Length: 175mm Handle Length: 100mm Width: 20mm Height: 32mm

Vee Bow Type Stainless Steel Handle And Forestay Attachment. Commonly used on boats like the Starling. Length: 150mm WT: 85g

Cleveco Murray "P" Class Bow handle/forestay attachment. Stainless steel. The eye takes 5mm shackle.

Bronze inspection plate cap for Chatfield 75mm inspection plates. This is a discontinued item with limited stock still available. Contact the sales...

"H" Hatch Hinge Chrome - Drop forged bronze hinges designed especially for marine use. The pin is solid 316 stainless steel for strength. DIMENSION...

A high quality chrome-plated brass fishing rod holder. Inset deck mounting (round). Made in NZ. Limited stocks available, only while stocks last.

Chrome plated bronze canopy clamp rod fitting. For 5/8" tube diameters. Made in New Zealand.