Hardware

Round Nylon Rings White. Available in two sizes. LARGE RING Inner Diameter: 32mm Outer Diameter: 45mm Bar Diameter Ø6.4mm SMALL RING Inner Diamet...

Brass table/counter hinge. Allows folding table to support itself when in use then fold 180 degrees on top of itself when not in use. Solid brass ...

High Quality Brass Silent Cabin hook. Double swivel joint and tapered hook minimize rattling and noise while holding the door firmly. Great for the...

Brass flush pull handle for sliding doors. Available in two sizes. Polished brass finish. Check with store for availability as limited stock

Elegant brass flush handles in polished brass or chrome plated finish. U shaped handle is wide for a strong and comfortable grip. Available in two...

Replacement centre caps for Nairn inspection ports. Available in black white or clear and three different sizes. Available thread diameters: 4" ...

Nairn Inspection port fitted with removable kit bag made from woven nylon and featuring a corded closure for added security of stored items. Keeps ...

Replacement drain bung only for Nairn drain plugs. Comes with stainless steel retainer clip. Thread Diameter: 20mm Flange Diameter: 30mm

Nairn inspection ports are manufactured to high tolerances using premium materials to provide high strength, durability and water tightness even in...

Quality stainless steel anchor fairlead with roller and retainer. Finished in highly polished stainless steel. Available in 327mm and 356mm lengths...

Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.

Homer Plastic Dome Ventilator. Internal adjustment knob controls air flow and allows vent to be closed from the inside during inclement weather. ...

Homer Hawse Deck Pipe cast in solid. 316 Stainless Steel. Two Sizes available. Use two back to back to create a fairlead in gunwale or bulwark. ...

Replacement plastic insert with cap for Homer rod holder HOM009859 Colour: Black.   Please note: these are Special Order items and need to be order...

Homer Flush Mount Rod Holder. This economical holder is stamped in 304 Stainless Steel 30 Degree Angle with a soft pvc flange gasket and integral ...

Homer Flush Mount Rod Holder cast in 316 Stainless Steel. 30 Degree Angle with a soft pvc flange gasket and integral flip-up cap. Length: 220mm Ini...

Homer Canopy Top Slide cast in 316 Stainless Steel For Tube size: 19mm(3/4") or 25mm (1") Pin size: 6mm Weight: 60gr

Homer Barrel Bolt cast in 316 S/S. Can be locked with a padlock - Not Included

Homer angled bow Fairlead 316 Stainless Steel. Comes as a port and Starboard side pair.

Homer Hit & Miss adjustable vent. Mirror polished 304 Stainless steel. Available in multiple sizes.

Homer Dome Vent 304 Stainless steel. Internal knob closes vent off while underway or in bad weather to prevent water ingress. Hole Size: 100mm Fl...

Homer 316 Stainless Steel Screw Eyes with ring. Designed to thread directly into wood. Cast eye with tapered cut thread and attractive polished fin...

Homer clevis pins with spring loaded ball end for a secure hold yet quick and easy installation and removal. 304 grade Stainless Steel. Available ...

Designed for one-person operation. Perfect for storage of Paddleboards, Surfboards, canoes and kayaks as well as general storage. Raise and lower w...

Designed for one-person operation. Raise and lower with a single control rope. Patented design lifts and lowers loads evenly, regardless of weight ...

Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. Harken® of...

Big Boat sheaves are available for special applications as well as for replacement sheaves in Big Boat blocks. Made of hardcoat-anodized, PTFE-impr...

Padeyes are great for mounting blocks and are also used as attachment points for staysails, reefing blocks, and hundreds of other items. The 627, 6...

The 061 stanchion mount base attaches blocks to 7/8 in or 1 in (22 or 25 mm) stanchions or pulpits and is often used to lead furling lines to the c...

DetMar Safety Grab Handle. Molded of high impact plastic, with a soft vinyl grip that wont corrode or discolor in harsh marine environments. Mounts...

Plain, flat brass rowlock plates. Easy to fit to most dinghies. Rowlock plates are necessary to help prevent excessive wear to wooden gunnels as we...

Open Bronze Rowlocks - Cast Bronze Finish - 12mm shaft (Sold In Pairs)

Create a non-damaging soft rubrail or rubbing strip on the gunnel of your boat.  Gunnel Guard Soft but tough two piece PVC fender strip helps prev...

Stainless steel general purpose cleats. Ideal for flag poles, blinds, and many other uses.

Polished brass cleat. Ideal for blind and curtain draw strings as well as wooden flag poles. Length: 50mm Width: 14mm Height: 15mm

Tenob medium nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. ...

Tenob large nylon bung, complete unit. Includes retaining clip to prevent loss of bung. Available in white or black, spare plugs also available. F...

Nylon drain plug only to suit DEC2510 bungs

Burgee Nylon Transom drain plug (bung) complete. Colour - Black. Medium pitch flat topped thread. Base (circular shape with flat across bottom) has...

Nylon horn cleats. Strong, light and affordable. 75mm & 100mm cleats are glass reinforced nylon.

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through coamings. The two sheaved variety is designed for...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through cockpit coamings. SMALL Max Rope Size: 8mm Over...

Hasp & Staple - Heavy Duty cast in brass and polished, these hasps & staples should not be confused with standard pressed or lightweight di...

Turn Button Hasp - suitable for skylight closures, lockers and many other applications.

Traditional high quality brass hatch and skylight fastener made by Davey and Co of England Base dimensions 40mm x 47mm Overall length 63mm