Hardware

Pin Type Gooseneck with slide Pin: 9.5mm Spring loaded plunger pin locates slide in position Suits RM103 external track

The new Antal Barber Block is a snatch block with low-friction-ring head. It provides:    - an immediate entry of the sheet (the cheekplate revolve...

NON-DRIP DESIGN The smooth angled outer frame prevents water from collecting on the frame and dripping into your cabin when the portlight is opened...

For a smoother profile, the frame on Gebo standard hatches has been extended to fit flush against the base mounting. The base mounting screws are c...

Olcese Ricci flush door handle. Ideal for drawers and sliding doors. Chrome Plated Brass. Available in two sizes: SMALL DOOR HANDLE Overall Length:...

Ronstan stainless steel U-Bolts are supplied with curved top plate, backing plate and nuts. Several Sizes available. Materials •Grade 316 stain...

Olcese Ricci stainless steel strap hinges with security pins. Large ends on the pin prevents it from being removed to aid security. Available in L...

Olcese Ricci padlockable over centre latch. Ideal for hatches and lockers. Pulls lid down tight for a better seal. Solid brass with chrome plated f...

Olcese Ricci back flap hinges. Made from pressed stainless steel, these hinges have a multitude of uses on the boat or in the home. Sold as a pair ...

Olcese Ricci Short/ Long stainless steel strap hinges. Made from pressed stainless steel with long straps, these hinges are ideal for hatches and l...

Olcese Ricci stainless steel hatch handle. Lift and turn handle to open hatch. Flush fitting and semi waterproof so can be used on exterior hatche...

Olcese Ricci Heavy Duty flush lift handle with catch and internal lever handle. Great for large hatches that must be able to be opened from inside ...

Olcese Ricci rim lock with inside knob. Two stage throw makes locking tounge twice as long as other rim locks. Ideal for applications that require...

Olcese Ricci rectangle stainless steel table hinge. Dual pin design allows hinge to support table horizontally when in use and flip table over 180...

Backing Plates only for Olcese Ricci OR1654 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR1654 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR1655 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing plates only for Olcese Ricci OR2469 mortise locks. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Escutcheon face plate to fit Olcese Ricci skeleton style key locks. Availabile in plain brass, chrome plated, or satin chrome plated finish. Sold i...

Olcese Ricci flat brass slide bolt. Solid brass with a flat design for a low profile. Extra long tounge allows this bolt to fit a variety of appli...

Olcese Ricci swivelling brass triple coat hook. Each hook can be swiveled to any angle to aid in holding up to three garments at once. Solid brass ...

Olcese Ricci heavy duty anti rattle mortise lock with deadbolt. Double tounge design clamps tightly into striker plate to prvent door from rattling...

Olcese Ricci heavy duty anti rattle mortise lock. Double tounge design clamps tightly into striker plate to prvent door from rattling. Includes lo...

Faceplate only for Olcese Ricci OR1648 mortice locks. Includes Vacant/Engaged indicator.

Olcese Ricci Rim Lock. Perfect for doors cupboards, hatches and lockers. Available in left or right hand versions with chrome plated or plain brass...

Olcese Ricci chrome plated brass cupboard spring catch. A heavy duty catch ideal for cupboard doors and locker or hatch lids. DIMENSIONS: Body Len...

Striker Plate only for Olcese Ricci OR1159 rim lock. Length: 75mm Width: 13mm Height: 14mm

Olcese Ricci Mortice Lock with skeleton style key. Brass construction with plain or chrome plated finish. Fits standard handles with square keyways...

Brass flush pull handle for sliding doors. Available in two sizes. Polished brass finish. Check with store for availability as limited stock

Homer Plastic Dome Ventilator. Internal adjustment knob controls air flow and allows vent to be closed from the inside during inclement weather. ...

Homer Flush Mount Rod Holder cast in 316 Stainless Steel. 30 Degree Angle with a soft pvc flange gasket and integral flip-up cap. Length: 220mm Ini...

Homer Hit & Miss adjustable vent. Mirror polished 304 Stainless steel. Available in multiple sizes.

Homer 316 Stainless Steel Screw Eyes with ring. Designed to thread directly into wood. Cast eye with tapered cut thread and attractive polished fin...

Polished brass cleat. Ideal for blind and curtain draw strings as well as wooden flag poles. Length: 50mm Width: 14mm Height: 15mm

Design The folding mooring cleat from Nomen provides the benefits of flush and rigid cleats to aesthetic perfection. Loose lines cannot get caught...

Handrail end to suit 19mm tube. Bronze finish. Made in NZ