Fittings

Hose tail with 120 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 120° Tails are suited to the ...

Ideal connector when different sized hoses need to be connected. Up to 3 different size Aquavalve tails can be screwed in to suit hose size and in...

Hose tail with 90 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 90° fittings are suited to the...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI & Burea...

Bronze Ball Valves BSP Threads. Bronze body with stainless ball and nylon liner. Available in multiple sizes. These genuine bronze ball valves are ...

Blakes traditional bronze seacocks. Manufactured from the highest specification marine grade bronze. - Unique built-in grease nipples to allow in-w...

Brass Name Plates to label deck fillers. Text available in either Diesel or Water

Cockpit drain 38mm with hose tail attachment. This cockpit drain is easily installed in the same way as a skin fitting and has a hose tail for a di...

Quality NZ Made bronze deck fillers with chrome plated finish. Internally threaded with 1-1/2 inch BSP thread. Available with text for Fuel or Water.

Black Glass Reinforced Nylon for high strength and durability. Labelled either "DIESEL", "WATER", or "PETROL". Accepts 38mm or 50mm (2") ID Hose.

Well drain with cover hood. Ideal for anchor lockers. White Nylon. Inside Diameter: 12.8mm Thread Diameter: 19.5mm Hood Width: 28mm Hood Length: 32mm

Bronze elbows 90 degree with female/female BSP threads. Multiple sizes available.

Fynspray Sink Waste and plug fittings. Available in white nylon or chrome plated brass finish. The smaller size makes these ideal for sinks and was...

Bronze BSP threaded Hex Nipple with external thread. For joining pipes and fittings of the same diameter. Available in multiple thread sizes.

Bronze BSP threaded hex plug. For blanking of plumbing pipes and fittings. Available in multiple sizes.

Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.

Homer Expanding Bung suits 25mm(1") hole. Brass or Stainless Steel body with rubber bung. Twist handle to expand bung and seal.

Homer Compartment Drain Hood 316 Stainless steel with nylon thread. Length can be adjusted. Perfect for anchor wells. Thread size: 19mm (3/4") We...

Homer 38mm Pipe Deck Filler cast in 316 Stainless Steel. Available with "Water" "Waste" or "Diesel" label. Fits 38mm hose. Flange Diameter: 75mm ...

Homer Straight Tank Vent Flush mount with cup. Marine Grade 316 Stainless Steel. Available in two hose sizes.

Homer Round Head Fuel Tank Vent 316 Stainless steel.

Tank Vent 12.7mm 1/2" for fuel or water tank. 316 grade Stainless Steel. Thread: 1/2" BSP Fits: 1/2" hose Tail Length: 30mm Max panel thickness: 16mm

Homer Tank Vent 316 stainless steel with stainless steel screen. May be used as either a fuel or water tank vent. Thread: 19mm Hose Size: 10MM (3/...

Homer Water Tank Vent 316 Stainless Steel. Round Head with fully threaded tail. BSP thread.

Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...

Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...

Tail Long Thread 120° TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the mat...

TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-rei...

TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides d...

Bronze Hose tails with BSP threads. Available in multiple sizes.

Bronze Hose Tail Elbows with male BSP threads. Available in multiple sizes.

Hose Tail Female BSP Thread 90° Bend TruDesign composite fittings are moulded from a glass-reinforced nylon composite. High strength, high-modulus ...

Olcese Ricci naval brass skinfittings with buit in scoop strainer. Naval brass has a very high resistance to de-zincification and other corrosion. ...

Designed and made in New Zealand, the Scoop Strainer is designed to divert large objects away from water intakes while the vessel is moving. This h...

Mecca intake scoop strainer. Cast bronze with a quality chrome plated finish.Made in New Zealand. DIMENSIONS:Length Overall: 116mmWidth Overall: 89...

Bronze BSP threaded skin/through hull fittings with back nut. Designed for direct attachment of ball valve or sea cock. These genuine bronze skin ...

Skin Fittings Recessed Recessed skin fittings are ideal for cockpit drains or through hulls on racing yachts. Designed and made in New Zealand, th...

Skin Fittings with Tails for above waterline use. The Skin Fitting with Tail body and nut are moulded from glass-reinforced nylon composite. High s...

Skin Fittings Threaded TruDesign range of Skin Fittings are the first composite through hull fitting to be certified by the International Marine C...

Bronze Socket Fittings with female BSP thread. Use to join two pipes or fittings of the same size.

Fitted at the end of a manual bilge pump suction hose deep in the bilge, a Whale strumbox prevents debris from entering and blocking the hose or bi...

Top entry one way strum box for manual bilge pumps. features a 1 way valve. Helps prevent debris blocking bilge pump and reduces back flow. DIMENSI...

Tenob nylon tank breathers. Ideal for small water tanks or anchor well drains. Available in black or white. Suits Hose Size: 16mm Flange Size: 29...

Mecca Fuel Tank Breather - chrome plated bronze with 90 degree hose tail. Internal Diameter: 10mm Fits Hose ID: 13mm (1/2")Flange Diameter: 25mmDep...

Mecca Fuel Tank Breather - chrome plated bronze. Internal Diameter: 12mm Fits Hose ID: 16mm Flange Diameter: 35mm

Mecca Fuel Tank Breather - chrome plated bronze with short hose tail. Internal Diameter: 19mm Fits Hose ID: 22mm (1/2")Flange Diameter: 44mmDepth b...