Dinghys Fittings

Wire cam leads maintain a low profile while holding the line close to the cleat. Fits Harken Standard and Micro cam cleats.  Specifications S...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced Carbo Cam cleat and wir...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. Kit includes hardcoat-anodized aluminum Cam-Matic® cle...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...

Homer clevis pins with spring loaded rotating toggle for a secure hold yet easy release. 304 grade Stainless Steel. 6mm x 45mm

Homer clevis pins with spring loaded ball end for a secure hold yet quick and easy installation and removal. 304 grade Stainless Steel. Available ...

Homer Rigid Eye Snaps. Marine grade 316 stainless steel. Available in several sizes.

Homer Round Ring 304 Stainless steel. Many sizes available.

Homer Sail Track Stop Internal portion of stop dimensions: • Length: 22mm •ø 13mm •Weight 41gr

Homer Eye to Eye Open body Turnbuckle.Aisi 316 stainless steel.Available in 3 sizes.Not Load Rated SPECIFICATIONS5mm Turnbuckle:- Thread Diameter: ...

Homer Jaw to Jaw Open body Turnbuckle. Available in three sizes. AISI 316 Stainless Steel Not Load Rated Specifications:5mm Turnbuckle:- Thread Dia...

High quality bronze piston jib hanks. Made in Sweden. Bend tab down to fasten to sail.

GULL OAR SLEEVES. Made from Black Polyurethane plastic, these sleeves cannot be broken under extreme conditions, are very resistant to abrasion and...

Includes one of each port and starboard 38.1 x 127mm

Stainless steel R clips. For easy installation and removal of dinghy rudders and clevis pins. Also known as grip clip. 304 grade spring stainless. ...

Riley stainless steel Track Slide with end lug and spring loaded stop. Suits RM103 22MM C-Track.

Riley Boom Block Hanger. Suitable for attaching mainsheet blocks to booms. Suitable for booms 70-80mm diameter. DIMENSIONS: Overall Length: 75mm...

Riley Rudder Gudgen stainless steel. Gap Width: 19mm Arm Length: 115mm Pin Hole Diameter: 8mm Overall Length: 143mm

Riley Rudder Gudgen stainless steel. Gap Width: 25mm Arm Length: 80mm Pin Hole Diameter: 8mm Overall Length: 110mm

Riley Rudder Gudgen stainless steel. Gap Width: 32mm Arm Length: 77mm Pin Hole Diameter: 8mm Overall Length: 107mm

Riley Rudder Gudgen stainless steel. Gap Width: 44mm Arm Length: 77mm Pin Hole Diameter: 8mm Overall Length: 107mm

Riley Rudder Gudgen stainless steel. Gap Width: 50mm Arm Length: 77mm Pin Hole Diameter: 8mm Overall Length: 107mm

Riley Stainless Steel Rudder Pin Length: 63mm Diameter: 6.3mm

Riley Transom Rudder Pintle. Stainless Steel. Hole provided for retaining clip (RM157) Hole Type: Plain Material Thickness: 2mm - 14 Gauge Moun...

Riley 22mm stainless steel C-Track. For goosenecks and dinghy jib sheet slides. LENGTH: 250MM

Ronstan small boat jib furler. Ideal for dinghies and small catamarans. S/S ball bearing swivel unit. Fork & fork take-off with 6.4mm (1/4") di...

Firm Grip, Precision Control – Ronstan Batlestick™ tiller extensions provide the highest level of control, for quick, decisive helm response in eve...

Firm Grip, Precision Control – Ronstan Batlestick™ telescopic tiller extensions provide the highest level of control, for quick, decisive helm resp...

Ronstan 4 Point boom block hanger. Slotted attachment hole allows shackle body to be passed through. 8 x 5mm (3/16") dia. fixing holes. Can be be...

Ronstan Carbon Fibre Cam Cleats. Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are de...

Ronstan Small Cam Cleats, Carbon Fibre. Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet...

Angled wedge kits for Ronstan Small cam cleats

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Ronstan Mast hound for masts 76mm-115mm. Suits mast dia.s between 76mm-115mm (3"-4 1/2") Actual drawing Applications •Used for attaching foresta...

Ronstan Medium Cam Cleats, Carbon Fibre. Intensive development efforts have produced this range of cleats that provide unbeatable holding power, ye...

Easily fitted to the ‘T-Cleat’ and ‘C-Cleat’. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating....

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Ronstan rope guides for medium cam cleats. Suits Ronstan Medium C-Cleats and T- Cleats.

Ronstan medium cam cleat fairlead. Used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Applications •S...

Ronstan medium cam cleat fairlead. Used to keep the uncleated line within close proximity to the cleat, facilitating recleating. Applications •S...

Angled wedge kits for Ronstan Medium cam cleats

Ronstan round tiller adapter. Suits 25-32mm (1-1 1/4") diameter tiller. Works with Ronstan RF3133 urethane universal joint. Materials •U.V. sta...

Ronstan stainless steel dinghy rudder gudgeon. SPECIFICATIONS: Hole Ø: 6.4 mm Internal Width: 26mm Strap Length: 58 mm Weight: 34 g

Ronstan stainless steel dinghy rudder gudgeon. SPECIFICATIONS: Hole Ø: 6.4 mm Internal Width: 38mm Strap Length: 51 mm Weight: 40 g

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Rope guide for Ronstan small Cam Cleat. Guides rope into the cleat a for a straight lead.