Dinghys Fittings

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized fo...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting...

Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams....

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting...

Wedge kits improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Micro St...

Harken® ball bearing Cam-Matic cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-a...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...

The 433 and 394 dinghy clew hooks are designed for Lasers® and other loose-footed dinghies. They install permanently on the boom and allow you to i...

Harken Dyneema LOUP soft attachments replace heavy stainless steel shackles on racing and cruising boats. Weight savings on large offshore boats ca...

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Can be ...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop ca...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6...

The 494 and 495 Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keep...

Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays ...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. A (mm) ...

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ...

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a...

ThIS simple and lightweight tiller extension design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort. The ...

The base cover snaps off to remove tiller extension. Weight (g) 5 g Weight (oz) 0.18 oz Length (mm) 44 mm Length (in) 1 3/4 in Width (mm) 22 m...

Wire cam leads maintain a low profile while holding the line close to the cleat. Fits Harken Standard and Micro cam cleats.  Specifications S...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for ...

Homer clevis pins with spring loaded rotating toggle for a secure hold yet easy release. 304 grade Stainless Steel. 6mm x 45mm

Homer clevis pins with spring loaded ball end for a secure hold yet quick and easy installation and removal. 304 grade Stainless Steel. Available ...

Homer Rigid Eye Snaps. Marine grade 316 stainless steel. Available in several sizes.

Homer Round Ring 304 Stainless steel. Many sizes available.

Homer Sail Track Stop Internal portion of stop dimensions: • Length: 22mm •ø 13mm •Weight 41gr

Homer Eye to Eye Open body Turnbuckle.Aisi 316 stainless steel.Available in 3 sizes.Not Load Rated SPECIFICATIONS5mm Turnbuckle:- Thread Diameter: ...

Homer Jaw to Jaw Open body Turnbuckle. Available in three sizes. AISI 316 Stainless Steel Not Load Rated Specifications:5mm Turnbuckle:- Thread Dia...

GULL OAR SLEEVES. Made from Black Polyurethane plastic, these sleeves cannot be broken under extreme conditions, are very resistant to abrasion and...

Includes one of each port and starboard 38.1 x 127mm

Stainless steel R clips. For easy installation and removal of dinghy rudders and clevis pins. Also known as grip clip. 304 grade spring stainless. ...

Riley stainless steel Track Slide with end lug and spring loaded stop. Suits RM103 22MM C-Track.

Riley Boom Block Hanger. Suitable for attaching mainsheet blocks to booms. Suitable for booms 70-80mm diameter. DIMENSIONS: Overall Length: 75mm...