Dinghys Fittings

Take the pain out of pulling smaller ropes. CL262 Power Grip 2 allows you to pull about 4 times as hard, compared to using your bare hands. Light, ...

A clamcleat which can be easily released even while under load. Simply pull the release cord and the cleat flips over, allowing the line to pull ou...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat. The fairlead guides the rope into the teeth. The specially shaped base means t...

The bottom roller allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Hard anodised finish. ROPE SIZE: 3-6MM ...

The becket holds the end of the rope under the cleat. No need for an extra fixing. BASE DIMENSIONS: 82 X 18MM ROPE SIZE: 3-6MM Manufactured from H...

With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used wi...

An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. ROPE SIZE: 3-6MM BASE DIMENSIONS: 48 X 15MM

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Silver Anodi...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

Rivet-on pulley block for use with CL248. The becket holds one end of the rope so that a 6:1 advantage can be rigged. The curved base allows fittin...

The roller fairlead allows ropes to enter the cleat from above. Hard anodised finish. ROPE SIZE 3-6MM

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey Hardcoat anodizing ROPE SIZE: 3-6MM BASE DI...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in standard silver anodising. ROPE SIZE: 3-6MM BAS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

With the CL215 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

Aids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Used to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Suitable for washboards up to 19...

Control line calibration strip. Waterproof PVC with sticky back. Attach to deck and use to achieve repeatable sail trim settings.   250mm long

Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can be found ...

Nylon deck bush for leading lines through decks, bulkheads or coamings. Available in black. DIMENSIONS length: 57mm Width: 38mm Thickness: 12mm Dep...

Deck Eye with 11mm hole for leading lines through or lashing lightly loaded objects. DIMENSIONS: Length: 34mm Width: 22 Height: 25mm Hole Size: 10...

PNP Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners pro...

Create a non-damaging soft rubrail or rubbing strip on the gunnel of your boat.  Gunnel Guard Soft but tough two piece PVC fender strip helps prev...

Sailing Control labels -Peel off sticky back. Fits most rope clutches or can stick directly to deck or cabin tops.  

Kit to rebuild Harken standard cam cleats #150 from 1993 and newer. Kits include: cam caps, washers, Delrin® balls, torsion springs, baseplate, cam...

The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

Self-contained sheaves are designed for sailors to use in custom applications. 16 mm AirBlock® sheaves are Delrin® and feature stainless ball beari...