Dinghy

Service kits for Andersen bailers.

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

Plastic bullet block. Designed for lashing attachment. Ideal for lazyjacks and other lightly loaded lines. Made in NZ Sheave diameter: 28mm Length:...

Replacement Carbon bushes for Seasure rudder gudgeons. Variation Details: The bushes are supplied with an undersize hole and will contract slight...

Nylon Jamb Cleat, Up To 6mm Rope Glass Reinforced Nylon Jamb Cleat With Fairlead Length Overall: 84mm Hole Spacing: 67mm WT: 15g

Cleveco stainless steel backing plates for saddles. Ideal for linking traveller cars or various other uses.

CLEVECO STAINLESS STEEL LINK PLATES Ideal for linking traveller cars or various other uses.

Cleveco Stainless Steel safety catch for holding dinghy rudders onto the transom gudgeons.DIMENSIONS:Overall Length: 102mmMounting Side Length: 38m...

Nylon deck bush for leading lines through decks, bulkheads or coamings. Available in black. DIMENSIONS length: 57mm Width: 38mm Thickness: 12mm Dep...

Deck Eye with 11mm hole for leading lines through or lashing lightly loaded objects. DIMENSIONS: Length: 34mm Width: 22 Height: 25mm Hole Size: 10...

Stainless Steel Channel Section Dinghy Jib Rack With stem fitting and provision for fitting of tow ring. Stem Fitting Length: 87mm Pin Diameter: 6...

Cleveco Murray Fixing Plate to suit CMRGA and CMRGB rudder brackets.DIMENSIONS:Overall Length: 115mmOverall Height: 21mmInner Hole Spacing: 41mmOut...

Flap Only for Riley 179 small bailers. Stainless Steel. DIMENSIONS: 19mm x 19mm

If you wish to buy these please contact info@harken.co.nz Why Choose Fibre Reinforced Composite Oars? These Fibre Reinforced Composite Oars are lo...

Cleveco Handle general purpose Stainless Steel. Made in NZ. Dimensions: Overall Length: 175mm Handle Length: 100mm Width: 20mm Height: 32mm

The 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system use...

The 433 and 394 dinghy clew hooks are designed for Lasers® and other loose-footed dinghies. They install permanently on the boom and allow you to i...

ThIS simple and lightweight tiller extension design has no unnecessary frills—every aspect contributes to its strength, stiffness, or comfort. The ...

The base cover snaps off to remove tiller extension. Weight (g) 5 g Weight (oz) 0.18 oz Length (mm) 44 mm Length (in) 1 3/4 in Width (mm) 22 m...

Flexible universal joint rotates to any nagle and does not bind like metal universal joints. Fits any Harken tiller extension as well as many other...

Homer clevis pins with spring loaded rotating toggle for a secure hold yet easy release. 304 grade Stainless Steel. 6mm x 45mm

Homer Boom Strap for hanging mainsheet blocks from dinghy booms. 316 Stainless Steel, two sizes available. SMALL BLOCK HANGER SPECIFICATIONS Max ...

Homer clevis pins with spring loaded ball end for a secure hold yet quick and easy installation and removal. 304 grade Stainless Steel. Available ...

Homer stay Adjuster Plates   SMALL STAY ADJUSTER SPECIFICATIONS •316 Stainless Steel •LENGTH 85mm •WIDTH 10mm •Adjustment increments-3mm •Thick...

Repalcement internal seal for Riley RM179 bailers. DIMENSIONS: Length: 79mm Width: 35mm Thickness: 3.4mm

Twist-on Nylon jib hanks. Perfect for easy attachment and removal of jibs on dinghies and small trailer yaachts. Permanenty attaches to sail eyelet...

Olcese Ricci stainless steel joint pins (toggle pins). Ideal for securing fittings that need to be quickly attached and removed without using tools...

Marlow's Waxed Polyester Whipping Twine is widely regarded as the best whipping twine on the market. Available in a variety of colours (size no. 4 ...

Cleveco Murray "P" Class Bow handle/forestay attachment. Stainless steel. The eye takes 5mm shackle.

PNP Push in bushes with stainless steel liners. Ideal for leading control lines through decks and coamings on sailing dinghies. Stainless steel lin...

PNP Screw in bushes with stainless steel liners. Ideal for leading control lines through decks and coamings on sailing dinghies. Stainless steel li...

Seasure "R" Clip - 2mm diameter Stainless Steel. Suitable for standard Sea Sure rudder pintles. Overall Length: 48mm Diameter: 2mm

Stainless steel R clips. For easy installation and removal of dinghy rudders and clevis pins. Also known as grip clip. 304 grade spring stainless. ...

Riley Bush Deck Fairlead. For leading control lines through decks. Stainless Steel, large radius for a smooth lead. DIMENSIONS: Overall Diamete...

Riley Fixed Band Pin Type Gooseneck. Stainless Steel. Pin Diameter: 9.5mm Pin Length: 65mm Fits masts 60mm to 90mm

Riley Pin Type Gooseneck with slide to fit bolt rope tracks Pin: 9.5mm Fits sail track 9.5mm diam and larger. Sail and downhaul secured with scr...

Riley Trapeze plate stainless steel. 4 X 45mm Slots. DIMENSIONS: Base Size: 82mm x 82mm Hook Opening: 21mm

Riley Rudder Gudgen stainless steel. Gap Width: 32mm Arm Length: 77mm Pin Hole Diameter: 8mm Overall Length: 107mm

Riley Pear Shaped Trapeze Ring. Single Bar. Stainless Steel. DIMENSIONS: Overall Length: 145mm Overall Width: 75mm Bar Width: 55mm Max Internal W...

Ronstan adjustable trapeze ring with block. Ball bearing block accepts up to 6mm (1/4") diam. Line Materials •Grade 316 stainless steel loop and...

Firm Grip, Precision Control – Ronstan Batlestick™ tiller extensions provide the highest level of control, for quick, decisive helm response in eve...

Firm Grip, Precision Control – Ronstan Batlestick™ telescopic tiller extensions provide the highest level of control, for quick, decisive helm resp...

Ronstan Fast Release Pins. Allows for rapid adjustment of side stays when using pin type stay adjusters. Materials •Grade 316 stainless steel ...

Reduces the risk of losing the stay when adjusting rig tension Applications •Typically used on dinghies, catamarans and small keelboats Materi...

Locks halyards off on a talurit / nico press swage. Reduces compression loads on mast and eliminates halyard stretch. Applications •Dinghy Halyar...

Ronstan round tiller adapter. Suits 25-32mm (1-1 1/4") diameter tiller. Works with Ronstan RF3133 urethane universal joint. Materials •U.V. sta...