CLAMCLEAT

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used wi...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

A clamcleat which can be easily released even while under load. Simply pull the release cord and the cleat flips over, allowing the line to pull ou...

With the CL209 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Applications include Canoes (seat & rudder lines); Din...

This accessory expands the capability of conventional Clamcleat® rope cleats. The Award Winning Keeper has been designed to overcome the problem of...

This is a discontinued item with limited stock available. Please contact our sales team for more information. CL247 Windsurfing downhaul cleat is m...

Allows 2:1 Micro adjustment of your brake line. The advantage of a 2:1 system is that the cleat will always be in the same position on the power li...

Hooks into the eye of a sail. Provides a 6:1 advantage when used with a suitable pulley block. For windsurfers and sand yachts. ROPE SIZE 3-5MM

The Cage is an accessory that allows ropes to be cleated and uncleated at an angle of up to 70 degrees, rather than only in line with the cleat. Ad...

The specially curved base is designed for fitting onto tubes from 29 to 32mm diameter. (1 1/8" to 1 1/4" diameter). Hard Anodised Aluminium. ROPE S...

150mm (6") Inspection Access Cover with seal # Available in Black and White:-- - DH6W is White with winch handle socket.- - DH6NW is white with pla...

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.

Rivet-on pulley block for use with CL248. The becket holds one end of the rope so that a 6:1 advantage can be rigged. The curved base allows fittin...

The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Silver Anodi...

An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. ROPE SIZE: 3-6MM BASE DIMENSIONS: 48 X 15MM

The bottom roller allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Hard anodised finish. ROPE SIZE: 3-6MM ...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL209 and CL254 ROPE SIZE: 4-8MM BASE DIM...

Manufactured from a glow in the dark material that improves its performance the colder it gets, this cleat is the ideal choice for holding guylines...

The CL206 is a cost effective cleat that has a low profile on flat or vertical surfaces. One of the first non-marine uses for Clamcleat® products ...

The CL206 is a cost effective cleat that has a low profile on flat or vertical surfaces. One of the first non-marine uses for Clamcleat® products ...

The CL265 is suitable for any bar with fixed or offset leader line adjustment. - Hands stay on the bar while adjusting. - Lock on, lock off with sm...

CL250 Windurfing downhaul cleat is manufactured from high pressure die-cast aluminium to give a light weight yet durable cleat. The rollers are man...

The CL232 is especially designed for those conditions where the rope has to be controlled from a position remote from the cleat. Minimum lift is re...

A side-entry version of the smallest Aero cleat. Allows the rope to be hooked under the fairlead of the cleat. Strong, compact and wear resistant. ...

This larger Aero cleat has a roller fairlead to allow a triangular rig to be tensioned. The aluminium cleat gives strength and wear resistant. The...

A side-entry version of the largest Aero cleat. Allows the rope to be hooked under the fairlead of the cleat. Strong and wear resistant. Easy to ri...

For inline fixing - Complete with CL211 Mk2 cleat + CL815 Keeper + CL817 Cage. Patented Keeper diverts the rope away from the cleat teeth when rap...