Below Deck Catches & Latches

Spacer only for armstrong push catches to use on thinner doors. 3mm thickness.

Push button latch for cupboard doors. Locks door in place with button pushed in flush and allows the door to be opened when the button is out. Chro...

Push button latch for cupboard doors. Locks door in place with button pushed in flush and allows the door to be opened when the button is out. Matt...

Olcese Ricci spring loaded ball latch. Screws directly into the edge of doors for simple and unobtrusive installation. Spring loaded catch ideal fo...

Polished brass skylight lift - Heavy duty lift utilising a tee bar screw. Available in two different lengths.

Stainless Steel Cabin Hook - 75mm or 100mm in length.

Heavy Duty Cast 316 stainless steel flush hatch latch.  •"T" handle twists to latch. •Spring loaded handle with rubber tabs to prevent rattling•Ca...

316 stainless steel face plates, bolts and knob with nylon back housing for smooth silent operation. This product features a spring loaded, adjusta...

Olcese Ricci brass cup hooks with galvanised steel woodscrew. Available In three sizes and polished brass or chrome plated finish. SIZE A DIMENSI...

Olcese Ricci curved sliding hatch holder with notches to hold hatch at varying levels. Stainless Steel construction. Available in two sizes and in...

Olcese Ricci Heavy Duty door holder. Bronze construction with either polished bronze or chrome plated finish. Internal spring provides a strong cat...

Olcese Ricci stainless steel door holder. Stainless body with plastic keeper. Catches door automatically when opened and holds it securely open un...

Olcese Ricci door stop and holder. Catches door automatically and holds it open until the lever is lifted to release. Chrome Plated Brass. Two siz...

The Silent, Plastic Cupboard Catch - Made in New Zealand Dimensions: Base 30mm x 10mm / Depth 25mm; Catch side L30mm x W15 x D15mm

Casement Window Fastener brass. For traditional wooden casement window frames. DIMENSIONS Base Plates: 57 x 16mm Total Arm Length: 59mm Arm length ...

Olcese Ricci lifting catch with key lock and flap. Secures hatches down tighlty and acts as a solid handle for lifting them. Top flap improves the...

Olcese Ricci Flush Hatch lock. Chrome plated brass rectangular base with T-Handle operation. Lift up handle and twist to operate latch. Also includ...

Olcese Ricci padlockable lifting catch with flap. Secures hatches down tighlty and acts as a solid handle for lifting them. Top flap improves the ...

Olcese Ricci Heavy Duty flush lift handle with catch and internal lever handle. Great for large hatches that must be able to be opened from inside ...

Olcese Ricci spring loaded flush pull latch. Ideal for floorboards and locker lids. Chrome plated brass. Includes finger pull to open from the insi...

Flush spring lifting ring catch 51 x 38mm. Ideal for floorboards and locker lids. Available in polished brass or chrome plated finish. DIMENSIONS:...

Hasp & Staple - Heavy Duty cast in brass and polished, these hasps & staples should not be confused with standard pressed or lightweight di...

Olcese Ricci Stainless Steel Hasp and Staple. Padlockable. DIMENSIONS: Hasp Length: 90mm Base Length: 35mm Width: 40mm Overall Length: 125mm Keep...

Olcese Ricci Chrome Plated Brass Hasp and Staple. Padlockable. Ideal for locking companionway hatches. DIMENSIONS: Hasp Length: 53mm Overall Leng...

Olcese Ricci Stainless Steel Hasp and Staple. Padlockable. Ideal for locking companionway hatches. Fastener holes are covered when hasp is closed ...

Traditional high quality brass hatch and skylight fastener made by Davey and Co of England Base dimensions 40mm x 47mm Overall length 63mm

Olcese Ricci padlockable over centre latch. Ideal for hatches and lockers. Pulls lid down tight for a better seal. Solid brass with chrome plated f...

Olcese Ricci stainless steel hatch handle. Lift and turn handle to open hatch. Flush fitting and semi waterproof so can be used on exterior hatche...

Homer Door Button 316 stainless steel. A simple solution for holding drawers and cupboards securely closed while underway. Size: 43mm Thickness:...

Homer Door Holder 304 Stainless steel. Holds doors securely open. Spring loaded for easy lock and release.

Homer Stainless Steel Door Stop and Catch. Door catches automatically upon contact and is held open. Push lever down with foot to release and close...

Homer Double Ball Catch 316 Stainless steel. Ideal for cupboard doors in the boat or home.

Homer Eccentric Latch with Padlock Ring 304 S/S. Keeper Width: 23mm Overall Width: 29mm Latcch Length: 59mm Length OA closed: 82mm Weight: 40g

Homer brass or chrome plated elbow catches. Concealed catches for cupboard doors and drawers. Can be installed on the inside of the door and opera...

Homer Elbow Catch 316 Stainless Steel. Concealed latch for securing cupboard doors and drawers. Base: 16 x 28mm Weight: 26gr

Homer Flush Ring Catch with push button. 316 Stainless steel. Base 62mm X 44mm Thickness; 8mm; Weight: 250g