Products

Seasure plastic rudder retaining clip. Designed to break if the rudder hits the bottom, allowing rudder to lift up reducing blade damage.

Rudder retaining clips manufactured with 316 stainless steel and moulded on end caps for ease of removal of the rudder. Overall Length: 65mm Overa...

Rudder Stern Bracket (Pintle) With 8 x 89mm (5/16" x 3 1/2") Pin And 6mm (1/4") Fixing Holes Weight: 78g

Rudder Stern Bracket (Gudgeon) With 8mm (5/16") Pin Clearance Holes And 6mm (1/4") Fixing Holes Weight: 38g

Rudder Strap Stainless Steel. 19mm (3/4") Wide Bushed For 8mm (5/16") Pin Weight: 92g

25mm (1") Wide Rudder Strap Stainless 8 x 76mm (5/16" x 3") Pin Weight: 170g

Rudder Strap Stainless Steel. 38mm (1 1/2") Wide. With 8mm (5/16") Pin Clearance Holes Weight: 120g

51mm (2") Wide Rudder Strap 8mm (5/16") Pin Clearance Holes Weight: 170g

51mm (2") Wide Rudder Strap, 8 x 76mm (5/16" x 3) Pin And 6mm Fixing Holes Weight: 78g

Bottom rudder transom pintle, 4-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. B...

Top rudder transom pintle, 2-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both...

The Rule 1000 manual bilge pump is in a class by itself and is a popular choice among boatbuilders and boat owners alike. 36 mounting variations an...

Rigorous engineering and testing helped generate the new series of bilge pumps. Our pumps are tested to the highest standard, achieving rated perfo...

High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any compa...

Engineered to commercial standards. The Rule 2000 manual bilge pump is the best selling high capacity submersible bilge pump in the world. 1-1/8" (...

The Rule 360 manual bilge pump provides outstanding quality and value. It is economically priced and designed for small boats. 3/4" (19mm) discharg...

The Rule 500 manual bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 ...

The Rule 800 manual bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 ...

The Rule High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm....

Rule Pumps RM500B, All-in-one pump & switch (no float switch required), Automatic 500 GPH submersible 12 volt DC bilge pump preferred by yachts...

Rule Pumps RM1100A, All-in-one pump & switch (no float switch required), Automatic 1100 GPH submersible 12 volt DC bilge pump preferred by yach...

Permits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting is inconve...

Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover that protects against debris and jammin...

Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for eas...

Olcese Ricci Flush Pull hatch lock with key. Stainless steel construction for maximum corrosion protection. Spring loaded pull ring prevents rattl...

Cleveco 3 hole stainless mast tang. Ideal for stay attachment on dinghy masts. Length: 68mm Width: 15mm Hole Spacing 26mm

Lacing Eye / Saddle - A standard pattern saddle stamped in brass. Length 45mm; Width 13mm; Height 12mm

Lacing Eye / Saddle - A low profile saddle cast in gunmetal bronze. Length 45mm; Width 16mm; Height 8mm

Cleveco Pulley Clip - Heavy Duty Saddle - 4 Hole DIMENSIONS 4 x 6mm Mounting Holes Length: 44mm (1 3/4")Width: 19mm (3/4") Breaking Strain: 1905kgs...

Cleveco Pulley Clip - Angled Heavy Duty Saddle to fit round masts. 4 x 6mm Mounting Holes Angled Pulley Clip Breaking Strain: 1905kgs Weight: 7gDI...

Cleveco Pulley Clip - Heavy Duty Saddle with Countersunk fastening holes. Smooth section allows free movement of attachments. Will not distort und...

Cleveco Pulley Clip - Heavy Duty Round Section Saddle 5mm (3/16") Mounting Holes Smooth section allows free movement of attachments. Will not disto...

Cleveco Pulley Clip - Light Duty Saddle. Pressed stainless steel.DIMENSIONS 6mm (1/4") Mounting Holes 40mm (1 19/32") Hole CentersOverall Length: ...

Cleveco Pulley Clip - Light Duty Saddle DIMENSIONSOverall Length: 45mmInternal Height: 14mm5mm (3/16") Mounting Holes 37mm (1 7/16") Holes Centers ...

International Standards approved marine whistle as available on selected lifejacket models

Neptune sail repair sewing kit. An essential piece of kit for small repairs on Dacron and Canvas sails. Contents: Right Hand Sewing PalmAssorted Sa...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Crystal clear mylar tape ideal for repairs to mylar panels & clear sail windows. Will also repair cracked perspex windows & hatches. Roll ...

Seasure white nylon shackle. Snap on. Used for attaching slides to mainsails. Made in UK. Three sizes available. DIMENSIONS: 6MM SHACKLE: Interna...

PNP Heavy Duty Nylon sail slide with stainless steel reinforcement. Fits 7/8" (22mm) flat mast track. •Suitable for Keelboat and Trailerable yacht...

Teflon impregnated Nylon sail slides to fit flat mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Brass external sail slides to fit brass internal 16mm or 20mm tracks. Slide Length 24mm. Comes with round thimble for lashing to sail.

Teflon impregnated plastic sail slugs. Available to suit various sizes of round mast track.

Teflon impregnated Nylon sail slugs to fit round mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Strong Stainless Steel sail slugs to fit round 3/8" 10mm mast tracks.

Vee Bow Type Stainless Steel Handle And Forestay Attachment. Commonly used on boats like the Starling. Length: 150mm WT: 85g