Products

Anchor Swivel Connector. Anchor swivels connect the chain to the anchor and help the anchor turn upright when entering the bow roller. Cast 316 Sta...

Anchor Swivel Connector Kong - 316 Stainless Steel. Anchor Swivels allow the anchor to automatically right itself on the bow roller for easy positi...

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

Service kits for Andersen bailers.

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

The ANDERSEN automatic bailers are available world wide and recognised by dinghy sailors as the most effective and reliable means of automatic bail...

The new Antal Barber Block is a snatch block with low-friction-ring head. It provides:    - an immediate entry of the sheet (the cheekplate revolve...

Antal Snatch Blocks are versatile for many uses on board. Completely made in U-V resistant high strength resin. It can be fastened with either a la...

The cheekplate revolves around the sheave axle allowing the block to open; a safety pin, which engages automatically on closing, stops the block fr...

ANTAL Santch Hooks can be easily hooked to a genoa or a spinnaker sheet: the lightest and strongest solution for a line control. Aluminium made, hi...

Homer antenna mount for VHF and GPS antennas. Ratchet with cam lock allows the antenna to be tilted to compensate for deck curvature or cabin angle...

Hose tail with 120 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 120° Tails are suited to the ...

Ideal connector when different sized hoses need to be connected. Up to 3 different size Aquavalve tails can be screwed in to suit hose size and in...

Hose tail with 90 degree angle designed specially to fit into Trudesign Aquavalve toilet diverter valves. Aquavalve 90° fittings are suited to the...

Y Pieces Designed and made in New Zealand, Tru-Design Y Pieces are the superior composite connection for combining the flow from 2 hoses. The Y Pie...

Spacer only for armstrong push catches to use on thinner doors. 3mm thickness.

Push button latch for cupboard doors. Locks door in place with button pushed in flush and allows the door to be opened when the button is out. Chro...

Push button latch for cupboard doors. Locks door in place with button pushed in flush and allows the door to be opened when the button is out. Matt...

Backplate for CL212, CL214W, CL241, CL258, CL259 & CL273. Use a backplate when riveting a cleat onto fabric as it will prevent the rivet pullin...

Escutcheon face plate to fit Olcese Ricci skeleton style key locks. Availabile in plain brass, chrome plated, or satin chrome plated finish. Sold i...

Backing Plates for Olcese Ricci mortise lock OR1150 and OR2072. Backing Plates fit under the handles on each side of the door and provide a pleasin...

Backing Plates only for Olcese Ricci OR1151 mortise lock with skeleton style key. Backing Plates fit under the handles on each side of the door an...

Backing Plates only for Olcese Ricci OR1651 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR1654 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR1655 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR1654 mortise lock. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing plates only for Olcese Ricci OR2469 mortise locks. Backing Plates fit under the handles on each side of the door and provide a pleasing app...

Backing Plates only for Olcese Ricci OR2070 sliding door mortise lock. Backing Plates fit under the handles on each side of the door and provide a...

Olcese Ricci spring loaded ball latch. Screws directly into the edge of doors for simple and unobtrusive installation. Spring loaded catch ideal fo...

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They are IMCI & Burea...

Bronze Ball Valves BSP Threads. Bronze body with stainless ball and nylon liner. Available in multiple sizes. These genuine bronze ball valves are ...

Polished brass skylight lift - Heavy duty lift utilising a tee bar screw. Available in two different lengths.

Chrome Plated Barometer Easy Fix System Our clocks, chronometers and weather instruments combine traditional design and the stylishnesss of the f...

Heavy duty plastic battery boxes with hold down straps. Impervious to battery acid. Two sizes available. Large: 330(L) x 180(W) x 205(H) Small: 270...

The 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distributi...

This battery knob option for 701 Switches is for applications where emergency parallel switch needs to be highlighted. • Replaces existing knob

This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or l...

The 714-140A-DVSR uses a dual sensing DVSR (710-140A). This system ensures that you will always have a fully charged reserve battery. When the swit...

The 721 Battery Selector Switch is our heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and ...

The 720 Heavy-duty Battery Switch fits into the same contour lock system as used on the battery distribution system. Rated at 600A continuous and 2...

Replacement key for BEP700 easyfit battery switch

The BEP MD motor driven range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increas...

Panel mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. • Compact, ligh...

The 708 links are designed for space saving interconnections of terminals when battery distribution modules are linked together. Four standard soli...

Davey Gunmetal Bronze Belaying Pins - O.A. Length 8-3/4" (222mm); Stem Length 5" (125mm); Stem Ø 5/8" (16mm)