Products

Homer Expanding Bung suits 25mm(1") hole. Brass or Stainless Steel body with rubber bung. Twist handle to expand bung and seal.

Homer Butterfly Vent / Hit and Miss Vent 304 Stainless steel. Centre knob to adjust vent.

Homer Butterfly / Hit and Miss Vent 304 Stainless steel. Side knob to adjust vent. Ideal for interior and compartment ventilation for boats and veh...

Homer Door Button 316 stainless steel. A simple solution for holding drawers and cupboards securely closed while underway. Size: 43mm Thickness:...

Homer Canopy Angle based Deck Hinge cast in 316 S/S. Fits 19mm and 25mm end cap fittings. Base Size: 60 x 20mm Bolt Size: 6mm Weight: 100g

Homer Canopy Top Cap cast in 316 Stainless Steel. For Tube size: 19mm(3/4") or 25mm (1") Pin size: 6mm Weight: 83g

Homer Canopy Top Slide cast in 316 Stainless Steel For Tube size: 19mm(3/4") or 25mm (1") Pin size: 6mm Weight: 60gr

Homer stainless steel carbine hook without thimble ring. 316 Stainless Steel.

Homer stainless steel carbine hook with thimble ring to keep hook captive on a rope. 316 Stainless Steel. These versatile carbine hooks have a hug...

Homer Clamp on Rod Holder cast in 316 Stainless Steel. Clamps onto 22mm (7/8") or 25mm (1") rails. Mountable vertical or horizontal Length: 228mm...

Small stainless steel clamshell vent. Ideal as an attractive covering for anchor locker drains or tank vents. Available in three sizes: SMALL - Wid...

Homer low flat cleats with four mounting holes. Cast in solid marine grade 316 stainless steel. Available in 3 sizes.

Homer Open Base Cleat with four Holes cast 316 stainless steel. A stylish cleat with highly polished finished.

Homer "Pop-Up" Cleat 316 Stainless steel - Retractable cleat retracts to only 12.5mm (1/2") above deck and has direct drainage to the bilge. Instal...

Homer "Sinking" Flush Cleat 316 Stainless Steel LOA: 195mm (8") Length of pop up cleat: 150mm (6") Weight: 640g

Homer black plastic inclinometer with easy to read green display. Comes with double sided tape for attachment. Reads angles up to 10 degrees. DI...

Homer black plastic inclinometer with easy to read green display. Comes with double sided tape for attachment. Reads angles up to 45 degrees. DI...

Homer Coat Hook 316 Stainless Steel Height: 40mm Width: 12mm Depth: 26mm Weight: 16g

Homer Compartment Drain Hood 316 Stainless steel with nylon thread. Length can be adjusted. Perfect for anchor wells. Thread size: 19mm (3/4") We...

Homer AISI 316 stainless steel D Shackles. Economical shackles ideal for a variety of uses. Available in multiple sizes. DIMENSIONS:4MM BOW SHACKLE...

Homer 38mm Pipe Deck Filler cast in 316 Stainless Steel. Available with "Water" "Waste" or "Diesel" label. Fits 38mm hose. Flange Diameter: 75mm ...

Homer Curved Hinged Chain Pipe. Curved deck pipe cast in 316 S/S. Leads anchor chains from the winch through the deck and into the anchor well. Ba...

Homer Hinged Chain Pipe, Oval shaped low line deck pipe cast in 316 S/S. Leads anchor chains through the deck and into the anchor well. Length: 14...

Homer solid cast stainless steel padeye. Cast in 316 marine grade stainless in a highly polished finish.

Homer Dome Vent 304 Stainless steel. Internal knob closes vent off while underway or in bad weather to prevent water ingress. Hole Size: 100mm Fl...

Homer Dome Vent 304 Stainless steel. Internal knob closes vent off while underway or in bad weather to prevent water ingress. Hole Size: 75mm Fla...

Homer Plastic Dome Ventilator. Internal adjustment knob controls air flow and allows vent to be closed from the inside during inclement weather. ...

Homer Heavy Duty Hatch Hinge (Short / Long) cast in 316 Stainless Steel. Sold in pairs. Size Open: •W38 x L60mm •Thickness: 4.5mm •Weight: 69g

Homer Door Holder 304 Stainless steel. Holds doors securely open. Spring loaded for easy lock and release.

Homer Stainless Steel Door Stop and Catch. Door catches automatically upon contact and is held open. Push lever down with foot to release and close...

All in one Dorade ventilator including internal pipe. Made from sturdy moulded plastic. Ventilates your cabin without letting in water. DIMENSION...

Homer Double Ball Catch 316 Stainless steel. Ideal for cupboard doors in the boat or home.

Homer Eccentric Latch with Padlock Ring 304 S/S. Keeper Width: 23mm Overall Width: 29mm Latcch Length: 59mm Length OA closed: 82mm Weight: 40g

Homer brass or chrome plated elbow catches. Concealed catches for cupboard doors and drawers. Can be installed on the inside of the door and opera...

Homer Elbow Catch 316 Stainless Steel. Concealed latch for securing cupboard doors and drawers. Base: 16 x 28mm Weight: 26gr

Homer 316 stainless steel ring nuts. Can be threaded directly onto the end of a bolt or onto an eye bolt for a double ended eye.

Homer Eye Plates. Stamped 304 stainless steel.

Homer Stainless Steel Eye Plate. Ideal for light load applications. DIMENSIONSBase Length: 45mmBase Width: 15mmHoop Inside: 15mm x 15mmBar Diameter...

Homer angled bow Fairlead 316 Stainless Steel. Comes as a port and Starboard side pair.

Fender Hook 316 S/S. Use to hang fenders or to tie down covers on boats or vehicles. LOA: 42mm Width: 20mm Weight: 18gr

Homer 57mm fixed bail snap shackle. 316 Stainless Steel. Eye size: 12mm Bail Size: 9mm Length: 57mm Breaking Load Approx: 1200kg

Homer Flag Pole Cleat 304 Stainless steel. Ideal for flag poles and blinds.

Homer Flag Pole Socket with a 10 degree Angle. Cast in 316 Stainless Steel. Available in sizes to fit 19mm, 25mm and 32mm diameter flag poles.

Economical, moulded, white flexible High-profile PVC cowl with red interior. Features a 360º swivelling cowl that snaps on and off the deck plate. ...

Homer Straight Tank Vent Flush mount with cup. Marine Grade 316 Stainless Steel. Available in two hose sizes.

Homer Hatch Hinge with threaded studs cast in 316 S/S. Reverse pin keeps hinge completely flush on top. Sold in Pairs Size Opened: W 40 x L 69mm Ro...

Homer Flush Ring Catch with push button. 316 Stainless steel. Base 62mm X 44mm Thickness; 8mm; Weight: 250g

Homer Flush Ring Catch 316 Stainless steel. Perfect for securing and lifting floorboards, catches into place when floorboard is lowered. Three Size...