Products

Rove Punch - An essential tool for neat copper nail & rove work. Maximum Nail Gauge 13g. Made from carbon steel. Made in Germany.

Stainless steel rowlock plate. Long shank minimises friction, noise and wear. Fits 9mm + 10mm rowlocks. Sold in pairs.

Stainless steel rowlock plate. Mounts on inside of gunnel. Long shank minimises friction, noise and wear. Fits 10mm rowlocks. Sold in pairs

Plain, flat brass rowlock plates. Easy to fit to most dinghies. Rowlock plates are necessary to help prevent excessive wear to wooden gunnels as we...

Polished brass or chrome plated open top rowlocks with locking mechanism, use raised or lowered. Sold individually Specifications: Top opening 41mm...

Open rowlock in white nylon plastic. Includes rowlock plate. Price is for one rowlock and plate only. DIMENSIONS: Rowlock Internal Diameter: 57mm ...

Closed Stainless Steel Ring Rowlocks with plastic covers - 9mm shaft Sold In Pairs

Rubbaweld Mast Boot Tape is a Self amalgamating tape that welds to itself by chemical action to form a waterproof covering. This tape is a non-adhe...

Top rudder gudgeon, 3-hole mounting with larger 10mm carbon bush. Ideal for larger dinghies with high rudder loads. Sea sure rudder fittings are p...

Bottom rudder gudgeon, 3-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both pin...

Top rudder gudgeon, 2-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both pintle...

Top rudder transom gudgeon, 4-hole mounting with carbon bush. Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Bo...

Top rudder transom gudgeon, 2-hole mounting with carbon bush. Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Bo...

Locking gate for dinghy rudder systems. Holds rudder down into pintles when sailing, Push in to remove rudder. Length: 57mm Width: 28mm Protrusio...

Rudder Strap Stainless Steel. 38mm (1 1/2") Wide 8 x 76mm (5/16" x 3") Pin Weight: 149g

Top rudder pintle, 2-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both pintles...

Bottom rudder pintle, 3-hole mounting. Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both pintles and gudgeons...

Seasure plastic rudder retaining clip. Designed to break if the rudder hits the bottom, allowing rudder to lift up reducing blade damage.

Rudder retaining clips manufactured with 316 stainless steel and moulded on end caps for ease of removal of the rudder. Overall Length: 65mm Overa...

Rudder Stern Bracket (Pintle) With 8 x 89mm (5/16" x 3 1/2") Pin And 6mm (1/4") Fixing Holes Weight: 78g

Rudder Stern Bracket (Gudgeon) With 8mm (5/16") Pin Clearance Holes And 6mm (1/4") Fixing Holes Weight: 38g

Rudder Strap Stainless Steel. 19mm (3/4") Wide Bushed For 8mm (5/16") Pin Weight: 92g

51mm (2") Wide Rudder Strap, 8 x 76mm (5/16" x 3) Pin And 6mm Fixing Holes Weight: 78g

Bottom rudder transom pintle, 4-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. B...

Top rudder transom pintle, 2-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both...

The Rule 360 manual bilge pump provides outstanding quality and value. It is economically priced and designed for small boats. 3/4" (19mm) discharg...

The Rule 500 manual bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 ...

The Rule 800 manual bilge pump offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 ...

The Rule High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm....

Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for eas...

Cleveco 3 hole stainless mast tang. Ideal for stay attachment on dinghy masts. Length: 68mm Width: 15mm Hole Spacing 26mm

Lacing Eye / Saddle - A standard pattern saddle stamped in brass. Length 45mm; Width 13mm; Height 12mm

Lacing Eye / Saddle - A low profile saddle cast in gunmetal bronze. Length 45mm; Width 16mm; Height 8mm

Cleveco Pulley Clip - Angled Heavy Duty Saddle to fit round masts. 4 x 6mm Mounting Holes Angled Pulley Clip Breaking Strain: 1905kgs Weight: 7gDI...

Cleveco Pulley Clip - Light Duty Saddle. Pressed stainless steel.DIMENSIONS 6mm (1/4") Mounting Holes 40mm (1 19/32") Hole CentersOverall Length: ...

Cleveco Pulley Clip - Light Duty Saddle DIMENSIONSOverall Length: 45mmInternal Height: 14mm5mm (3/16") Mounting Holes 37mm (1 7/16") Holes Centers ...

International Standards approved marine whistle as available on selected lifejacket models

Neptune sail repair sewing kit. An essential piece of kit for small repairs on Dacron and Canvas sails. Contents: Right Hand Sewing PalmAssorted Sa...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Crystal clear mylar tape ideal for repairs to mylar panels & clear sail windows. Will also repair cracked perspex windows & hatches. Roll ...

Seasure white nylon shackle. Snap on. Used for attaching slides to mainsails. Made in UK. Three sizes available. DIMENSIONS: 6MM SHACKLE: Interna...

PNP Heavy Duty Nylon sail slide with stainless steel reinforcement. Fits 7/8" (22mm) flat mast track. •Suitable for Keelboat and Trailerable yacht...

Teflon impregnated Nylon sail slides to fit flat mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Brass external sail slides to fit brass internal 16mm or 20mm tracks. Slide Length 24mm. Comes with round thimble for lashing to sail.

Teflon impregnated Nylon sail slugs to fit round mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Strong Stainless Steel sail slugs to fit round 3/8" 10mm mast tracks.