Products

This lightweight, full-strength, Prusik-minding pulley is ideal for mountain rescue, swiftwater, or other technical teams where equipment weight is...

SQUID Rig Plate is an innovative tool for twin tension rope systems (TTRS) and load-sharing applications. Its multi-planar design features a large ...

Coach screws, silicon bronze hex head. Ideal for use below the waterline.

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through cockpit coamings. SMALL Max Rope Size: 8mm Over...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through coamings. The two sheaved variety is designed for...

Cockpit drain 38mm with hose tail attachment. This cockpit drain is easily installed in the same way as a skin fitting and has a hose tail for a di...

This lightweight and strong folding tether eye allows sailors to harness themselves in using a tether while in the cockpit. Manufactured from 316 s...

Use with the Harken Reflex furling system. The quick-release modular T-fitting allows the bottom unit to handle code zero as well as asymmetric sai...

Use with the Harken Reflex furling system. The quick-release modular T-fitting allows the bottom unit to handle code zero as well as asymmetric sai...

Used to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Suitable for washboards up to 19...

A sturdy military style Lensatic compass for use with topographical maps with a folding alloy body and sight lens. Ideal as a gift for the outdoors...

Replacement Acetal Composite Sheave only for Spinlock T50 deck organiser. Can also be used as a general purpose sheave. DIMENSIONS: Overall Di...

Black Cone - Day Signal shape made of black nylon. Two piece construction allows shape to be easily disassembled for flat storage. Two cones may be...

Control line calibration strip. Waterproof PVC with sticky back. Attach to deck and use to achieve repeatable sail trim settings.   250mm long

Copper Roves to be used with Rose Head Copper Nails to create rivets for fastening planked wooden boats. Available in various sizes. Sold per 500g...

Copper Sheet - Soft copper sheet for sheathing traditional wooden hulls against attack by worm and fouling. Dimensions: 1000mm x 600mm x 0.5mm Shi...

Copper talurits for permanently crimping loops or eyes into the end of wire ropes. Can be used with hand crimping tools or hydraulic press. Availa...

Oval Shape Single Cork floating key chain

Silicon Bronze cotter pins. Imperial Sizes The 3/32 x 1", 1/4 x 3" and 1/4 x 2" options are discontinued items with limited stock available. Please...

Brass table/counter hinge. Allows folding table to support itself when in use then fold 180 degrees on top of itself when not in use. Solid brass ...

Heavy cast bronze cowl vents with flush bronze deck plates, produced in the UK by traditional methods. The outer surface is polished chrome and the...

The new Crewfit range are the first lifejackets of their kind in the world to offer; safe, stylish, comfortable and affordable solutions to the eve...

The new Crewfit range are the first lifejackets of their kind in the world to offer; safe, stylish, comfortable and affordable solutions to the eve...

The ErgoFit Safety Knife is designed to be safe to carry with you at all times on the water, but highly effective should you need to cut through ro...

It has long been known that the addition of a spray hood inside a lifejacket can significantly enhance the wearer’s safety. It increases visibility...

It has long been known that the addition of a spray hood inside a lifejacket can significantly enhance the wearer’s safety. It increases visibility...

Rearming packs to fit ErgoFit Hammar lifejackets. MA1 38g Hammar - for ErgoFit 190N lifejackets MA1 60g Hammar - for ErgoFit 290N lifejackets

Rearming packs for automatic lifejackets including gas cylinder to suit: 23g Automatic - For Junior Crewfits

The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator which is currently found on automatic Crewsaver lifejackets - ...

304 stainless steel Cup Hook with wood screw thread.

Olcese Ricci brass cup hooks with galvanised steel woodscrew. Available In three sizes and polished brass or chrome plated finish. SIZE A DIMENSI...

Brass cup washers. Available to suit a range of wood screw sizes and in plain brass or nickel plated finish.

Captain Currey Rigging kit with spike, knife, shackler and leather sheathe. Made in England. Kit Includes: •Rosewood Handle : 4 - 100mm Stainless...

Olcese Ricci curved sliding hatch holder with notches to hold hatch at varying levels. Stainless Steel construction. Available in two sizes and in...

The Cyclops Gateway is used to connect the Cyclops smarttune® and smartlink® to your existing NMEA2000 onboard electronics. Utilising Bluetooth tec...

Want to know the load on any rope on board? Want to hit that fast setting every time? Want to load up the tack line and deploy the Code Zero straig...