Products

WATERTIGHT DESIGNUnlike many designs, Gebo portlights are designed for watertight hull fitting, so there’s no problem when a heeling yacht places t...

DetMar Safety Grab Handle. Molded of high impact plastic, with a soft vinyl grip that wont corrode or discolor in harsh marine environments. Mounts...

Grunt Emergel made in New Zealand  Rust, stain and oxidation remover restores and cleans Metal, Fabric, Wood, Fibreglass, Gelcoat, Lacquer, & E...

If you wish to buy these please contact info@harken.co.nz Why Choose Fibre Reinforced Composite Oars? These Fibre Reinforced Composite Oars are lo...

Replacement glass for Gipsy Moth Lamps and Fastnet Gimballed Lamps. Dimensions of our glass chimney are: Base - 2" (52mm) Height - 6" (150mm)

Half Cowl Vent - Left or Right Hand - Cast from gunmetal bronze, these vents are designed to fit to the sides of engine compartments. They are usua...

Harken Halyard restrainers prevent the halyard from wrapping around the furling foil on boats where the swivel isn’t mounted near the masthead. Sh...

Features spring loaded handle and rotating head for easy operation Suitable for rivet sizes 2.4mm, 3.2mm, 4.0mm and 4.8mm Interchangeable dies for...

Spare handle for Murray MW005, MW006,MW008 winch. 355mm Cast from solid manganese bronze. Available in Chrome Plated or Polished Bronze.

Replacement Handle and Rivet Sleeve only for Riley RM180 large bailers. These are currently not in stock and we are having trouble sourcing. Will u...

"In Boating circles there is a truism, that the most efficient bilge pump in the world is a frightened sailor wielding a bucket. Most times boating...

HANSEN METEOR BILGE PUMP - OVERHAUL KIT INCLUDES:•1 x Diaphragm•2pcs Diaphragm clamps•1 x Door Gasket•2 x Flapper valves•S/S Fastener kit Available...

Service Kit for Hansen Meteor Bilge Pump. Includes *1 x BPS/2S Diaphragm *1 x BPT/5 Door Gasket *2 x BPT/4 Flapper Valves Available to order, conta...

Adapter plate for split backstay adjuster. Fits onto Harken 38mm wire blocks #304. Weight (g) 28 g Weight (oz) 1 oz

Stamped shackles are used on most Harken Small Boat Blocks and are appropriate for low loads. For higher loads, select forged and high-resistance s...

The entire line of Black Magic Air blocks has been redesigned with a sleek new look. Their unique, performance-packed engineering remains exactly t...

Cruising ESP blocks complement our existing blocks in looks and function, but are simpler in design and construction. Sheaves feature sleeve bearin...

Low-profile mastbase halyard lead blocks are lightweight and can be grouped in a small area at the mastbase. Sheave Ø (mm) 102 mm Sheave Ø (in) 4...

Harken 16mm Dinghy Jib Lead track. Perfect for jib leads on dinghies and beachcats. Track is extruded from high-grade 6061-T6 aluminum and hardcoa...

The 2.25 in (57 mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats ...

The 2.25 in (57 mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats ...

High-load sheaves are offered as replacement parts or for use in special applications. Their bearing system combines sideload-carrying balls with a...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Has 4 inch imperial hole spacings rather...

Low-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats o...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Harken ball bearing traveller cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Fits Harken 22mm Small Boat Tra...

Harken 22mm Small Boat pinstop track. Works with both pinstop and ball bearing traveller cars. Track is extruded from high-grade 6061-T6 aluminum a...

These adapters upgrade many Harken 22mm Small Boat ball bearing CB traveller cars to race-ready windward sheeting cars. Adapters also fit several o...

27 mm Access Rail WORK EXTERNALLY WITH FREEDOM OF MOVEMENT The Harken Access Rail system is designed to be used as an adjustable anchorage point ...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

Race once with the windward sheeting traveller car and you’ll never race without one again. Pull the car above the centerline without releasing the...

ESP end controls are value-oriented options for the installation of 2:1 to 5:1 systems. Designed for strength and durability, controls feature axle...

CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carri...

CB adjustable High Load genoa lead cars feature 4 races of recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainle...

CB adjustable High Load genoa lead cars feature 4 races of recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainle...

Harken Midrange low friction ball bearing traveller cars allow easy adjustment of loaded sails from the cockpit. High Load Coupled traveller cars s...

CB adjustable High Load genoa lead cars feature 4 races of recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainle...

CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carri...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of...

Low-friction Through Deck Bullet blocks lead control lines through decks and spars. They are compact and lightweight, with fast trim and release un...

Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of...

Fits Harken 32mm Traveller Cars: T3204B.HL, T3224B.HL, T3234B.HL, and T3244B.HL cars. Sheave Ø (mm) 57 mm Sheave Ø (in) 2 1/4 in Length (mm) 14...

The CRX Roller traveller carries almost double the load at half the weight of similarly sized traveller cars. Torlon® rollers provide increased bea...

HARKEN CRX Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fits 32mm CRX roller cars. ...

High-performance end controls allow the installation of 2:1 to 5:1 purchases. Designed for high-performance, free-running systems, Carbo control bl...

High-performance end controls allow the installation of 2:1 to 5:1 purchases. Designed for high-performance, free-running systems, Carbo control bl...

3173 high-load controls allow 2:1 purchases on offshore boats with mainsails over 37 m² (400 ft²). Controls feature 57 mm Black Magic® Big Boat bal...