Products

An elegant design in black or white nylon. The rope drops down into the teeth. Uses include control lines for dinghies, kayaks and greenhouse vents...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

Double your pulling power AND take the pain out of pulling smaller ropes. CL261 Power Grip 1 allows you to pull twice as hard, compared to using yo...

Take the pain out of pulling smaller ropes. CL262 Power Grip 2 allows you to pull about 4 times as hard, compared to using your bare hands. Light, ...

A clamcleat which can be easily released even while under load. Simply pull the release cord and the cleat flips over, allowing the line to pull ou...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat. The fairlead guides the rope into the teeth. The specially shaped base means t...

The bottom roller allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Hard anodised finish. ROPE SIZE: 3-6MM ...

The becket holds the end of the rope under the cleat. No need for an extra fixing. BASE DIMENSIONS: 82 X 18MM ROPE SIZE: 3-6MM Manufactured from H...

With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used wi...

An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. ROPE SIZE: 3-6MM BASE DIMENSIONS: 48 X 15MM

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Silver Anodi...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

Rivet-on pulley block for use with CL248. The becket holds one end of the rope so that a 6:1 advantage can be rigged. The curved base allows fittin...

The roller fairlead allows ropes to enter the cleat from above. Hard anodised finish. ROPE SIZE 3-6MM

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey Hardcoat anodizing ROPE SIZE: 3-6MM BASE DI...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in standard silver anodising. ROPE SIZE: 3-6MM BAS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

With the CL215 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

Aids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Use with the Harken Reflex torsion cable. For each additional sail, order these components separately so you can easily switch furled sails using...

Use with the Harken Reflex torsion cable. For each additional sail, order these components separately so you can easily switch furled sails using...

Nylon Jamb Cleat, Up To 6mm Rope Glass Reinforced Nylon Jamb Cleat With Fairlead Length Overall: 84mm Hole Spacing: 67mm WT: 15g

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

Cleveco 19mm C Track. Formed in stainless steel to give a rigid section conforming to the mast radius yet providing sufficient base area for deck m...

GENOA SLIDE BLOCK - SWIVEL & RUBBER HINGED, SUIT 1 1/4" 32MM TRACK 60mm x 19mm (2 3/8" x 3/4") Delrin Sheave Genoa Lead Slide Block, Suit 32MM ...

Cleveco Chrome Plated Bronze Track End Stop Suit 32 x 6mm (1 1/4" x 1/4") T- Track Product Code: MW128X

Cleveco stainless steel backing plates for saddles. Ideal for linking traveller cars or various other uses.

Cleveco 48mm inline fiddle block with slotted top. Ideal for smaller keelers and cruising boats. A very sturdy and long lasting block. Made in NZ. ...

Cleveco 57mm inline fiddle block with ferrule top. Ideal for smaller keelers and cruising boats. A very sturdy and long lasting block. Made in NZ. ...

Cleveco Keeler block, 60x19mm delrin sheave, shackle top with swivel. Ideal for smaller keelers and cruising boats. A very sturdy and long lasting...