Products

Bottom rudder pintle, 3-hole mounting. Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both pintles and gudgeons...

Seasure plastic rudder retaining clip. Designed to break if the rudder hits the bottom, allowing rudder to lift up reducing blade damage.

Rudder retaining clips manufactured with 316 stainless steel and moulded on end caps for ease of removal of the rudder. Overall Length: 65mm Overa...

Rudder Stern Bracket (Pintle) With 8 x 89mm (5/16" x 3 1/2") Pin And 6mm (1/4") Fixing Holes Weight: 78g

Rudder Stern Bracket (Gudgeon) With 8mm (5/16") Pin Clearance Holes And 6mm (1/4") Fixing Holes Weight: 38g

Rudder Strap Stainless Steel. 19mm (3/4") Wide Bushed For 8mm (5/16") Pin Weight: 92g

25mm (1") Wide Rudder Strap Stainless 8 x 76mm (5/16" x 3") Pin Weight: 170g

Rudder Strap Stainless Steel. 38mm (1 1/2") Wide. With 8mm (5/16") Pin Clearance Holes Weight: 120g

51mm (2") Wide Rudder Strap 8mm (5/16") Pin Clearance Holes Weight: 170g

51mm (2") Wide Rudder Strap, 8 x 76mm (5/16" x 3) Pin And 6mm Fixing Holes Weight: 78g

Bottom rudder transom pintle, 4-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. B...

Top rudder transom pintle, 2-hole mounting with carbon bush Sea sure rudder fittings are precision machined, tough, reliable, and lightweight. Both...

Cleveco 3 hole stainless mast tang. Ideal for stay attachment on dinghy masts. Length: 68mm Width: 15mm Hole Spacing 26mm

Lacing Eye / Saddle - A standard pattern saddle stamped in brass. Length 45mm; Width 13mm; Height 12mm

Lacing Eye / Saddle - A low profile saddle cast in gunmetal bronze. Length 45mm; Width 16mm; Height 8mm

Cleveco Pulley Clip - Heavy Duty Saddle - 4 Hole DIMENSIONS 4 x 6mm Mounting Holes Length: 44mm (1 3/4")Width: 19mm (3/4") Breaking Strain: 1905kgs...

Cleveco Pulley Clip - Angled Heavy Duty Saddle to fit round masts. 4 x 6mm Mounting Holes Angled Pulley Clip Breaking Strain: 1905kgs Weight: 7gDI...

Black nylon saddle. Dimensions: Length: 45mm Width: 13mm Height: 15mm Hole Spacing: 32mm Hole Size: 4mm

Cleveco Pulley Clip - Heavy Duty Saddle with Countersunk fastening holes. Smooth section allows free movement of attachments. Will not distort und...

Cleveco Pulley Clip - Heavy Duty Round Section Saddle 5mm (3/16") Mounting Holes Smooth section allows free movement of attachments. Will not disto...

Cleveco Pulley Clip - Light Duty Saddle. Pressed stainless steel.DIMENSIONS 6mm (1/4") Mounting Holes 40mm (1 19/32") Hole CentersOverall Length: ...

Cleveco Pulley Clip - Light Duty Saddle DIMENSIONSOverall Length: 45mmInternal Height: 14mm5mm (3/16") Mounting Holes 37mm (1 7/16") Holes Centers ...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Ideal for long-lasting emergency sail repairs. Suitable for all sails, including heavy spinnakers. Can be edge stitched for a permanent repair. Ide...

Crystal clear mylar tape ideal for repairs to mylar panels & clear sail windows. Will also repair cracked perspex windows & hatches. Roll ...

Seasure white nylon shackle. Snap on. Used for attaching slides to mainsails. Made in UK. Three sizes available. DIMENSIONS: 6MM SHACKLE: Interna...

PNP Heavy Duty Nylon sail slide with stainless steel reinforcement. Fits 7/8" (22mm) flat mast track. •Suitable for Keelboat and Trailerable yacht...

Teflon impregnated Nylon sail slides to fit flat mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Teflon impregnated plastic sail slugs. Available to suit various sizes of round mast track.

Teflon impregnated Nylon sail slugs to fit round mast tracks. These sail slides offer minimum friction for easy hoists and drops as well as excelle...

Strong Stainless Steel sail slugs to fit round 3/8" 10mm mast tracks.

Vee Bow Type Stainless Steel Handle And Forestay Attachment. Commonly used on boats like the Starling. Length: 150mm WT: 85g

Packs of multiple sailmakers needles. Packs of 6, 10 or 20 available.

Sailmakers Needles, various standard sizes available.

SAILTECK Sail to Win. Race Compass Robust and waterproof Sailteck uses proven sealing techniques to guarantee water integrity to 20m submersion an...

SAILTECK Sail to Win.  Mast bracket for SK01 race compass unit. Rugged design Multiple fixing options: strap, slug, bungee UV Stable Included in ...