Products

Bronze Ball Valves BSP Threads. Bronze body with stainless ball and nylon liner. Available in multiple sizes. These genuine bronze ball valves are ...

Davey Gunmetal Bronze Belaying Pins - O.A. Length 8-3/4" (222mm); Stem Length 5" (125mm); Stem Ø 5/8" (16mm)

Polished cast gunmetal bronze boat hook ends. For attaching to wooden boat hook poles. SPECIFICATIONS: DAV1000/GM - Length: 6" (150mm)Stave Diamete...

Narrow thickness solid brass nuts with imperial UNC or metric thread.

The most common screw head type - used for general fastening when the screw head will be flush with the surface or when it will be countersunk and ...

NZ Made heavy duty manganese bronze washers. Available in multiple sizes.

Chain / Shroud Plates - Polished gunmetal bronze. To ensure correct positioning of the plates to the vessel, they are supplied undrilled, thus allo...

Coach screws, silicon bronze hex head. Ideal for use below the waterline.

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through cockpit coamings. SMALL Max Rope Size: 8mm Over...

Coaming lead in Gunmetal bronze/ polished. Coaming Leads are invaluable for passing lines through coamings. The two sheaved variety is designed for...

Deck lights are a great way to get natural light down below and lighten up even the darkest spaces. The round glass lens concentrates sunlight and ...

Deck lights are a great way to get natural light down below and lighten up even the darkest spaces. The round glass lens concentrates sunlight and ...

Bronze elbows 90 degree with female/female BSP threads. Multiple sizes available.

Angled Bow fairleads in gunmetal bronze. Available in 3 different lengths and port or starboard configurations. Made in the UK by Davey and co.

Through Bulwark Fairleads - These fairleads are cast in gunmetal in two equal halves and supplied undrilled. For screw fixing the holes should be d...

Davey Deadeye/Fairlead - Sheet lead - Lignum Vitae timber bullseyes in a Polished bronze screw down saddle. 12mm Fairlead Fairlead Eye Diameter: 1...

Straight fairleads in gunmetal bronze with lip to protect gunnel or toerail. Available in 3 different lengths. Made in the UK by Davey and Co.SPECI...

Gunmetal bronze flagpole sockets with built in cleat for on deck mounting. Raked at a 20 degree angle.

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Gunmetal Bronze Dutch Style Flagstaff Socket - Designed for traditional Dutch Vessels, these gunmetal flagstaff sockets are mounted on the trailing...

Olcese Ricci Heavy Duty flush lift handle with catch and internal lever handle. Great for large hatches that must be able to be opened from inside ...

A traditional brass bilge pump with no nonsense dependability and construction. The heavy gauge 1 1/2" brass tube allows for smooth operation with ...

An elegant top of the line pump with traditional styling and solid brass casting, featured as The Proper Pump in Mates book "The Finely Fitted Yach...

Service kits for Fynspray Galley Pumps. Kits for all models available Available to order, contact store via orders@harken.co.nz or 09 3033 744

Half Cowl Vent - Left or Right Hand - Cast from gunmetal bronze, these vents are designed to fit to the sides of engine compartments. They are usua...

Highfields Pattern Running Backstay Lever - Gunmetal channel section, polished outside and pivoted with two side bolts leaving the channel clear fo...

Bronze Hose tails with BSP threads. Available in multiple sizes.

Bronze Hose Tail Elbows with male BSP threads. Available in multiple sizes.

NZ made Manganese bronze nuts with Whitworth imperial threads.  BSW Thread, to use with Lag Screws Bronze.

Mast or bowsprit bands cast in gunmetal bronze with 4 eyes. Made by Davey and Co London. Available in several sizes to suit different mast diameters.

A new development of this classic light now means that it can be wired directly to 12v/24v DC.  Cast in bronze with a sand blast finish. The base o...

Maltese Cross Bollard - Cast in tough polished manganese bronze with four-hole fixing. Ideal as a mooring bollard. Made in New Zealand.

Small exhaust deflector - 114mm Large exhaust deflector - 127mm

Mecca intake scoop strainer. Cast bronze with a quality chrome plated finish.Made in New Zealand. DIMENSIONS:Length Overall: 116mmWidth Overall: 89...

Available to order. Contact store

Our Silicon Bronze ring nails (also referred to as bronze boat nails or ring shank nails) are threaded with annular ring barbs to create a locking ...

Riley bronze sheave suitable for rope or wire. Bronze provides low friction turning and great wear resistance. DIMENSIONS: Outside Diameter: 38mm ...

Riley chrome plated bronze sheave suitable for rope or wire. Bronze provides low friction turning and great wear resistance. DIMENSIONS: Outside D...

Coach bolts are designed for throughbolting where the square neck is used to keep the bolt from turning as a nut is tightened on the other end. Wil...

Silicon Bronze Hex bolts. Tighten hex head cap bolts and screws with a socket or hex wrench. These imported fasteners are ideal for marine environm...

Silicon Bronze nuts imported from the USA with heavy duty UNC threads.

Bronze BSP threaded skin/through hull fittings with back nut. Designed for direct attachment of ball valve or sea cock. These genuine bronze skin ...

Spinnaker Pole End in Polished gunmetal bronze - A stylish end socket to fit a wooden spar. Sprung piston end. SPINNAKER POLE END SIZING SMALL - 10...

Stem head Fitting cast in polished gunmetal bronze. This strong stem head fitting takes the load down the front of the stem and is suitable for cra...

Bronze Toerail Fairlead. Polished bronze or chrome plated finish Mooring fairlead suitable for boats from 30 to 50 feet. Can be mounted on port or...