Products

Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction. Applications •...

Ronstan swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below. ...

Ronstan manufactures an extensive range of sheave boxes for use with rope and wire. Plain bearing sheaves are ideal for halyards and other applicat...

Ronstan Stand up spring padeyes add functionality to the range of blocks. Suits Ronstan series 50 all purpose and ball bearing blocks. Materials...

The Sheaveless Block Available in four colour options - blue, green, grey and red with several attachment options, including webbing, pigtail, lash...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and rele...

Rope guide for Ronstan small Cam Cleat. Guides rope into the cleat a for a straight lead.

Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when...

Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when...

Ronstan spinnaker Pole Ring with curved base. Applications •Suit most common mast profiles Materials •Grade 316 stainless steel SPECIFICATIONS ...

Ronstan heavy duty spinnaker Pole Ring with curved base and braced ring. SPECIFICATIONS Material Ø: 11.0 mm Ring Ø: 44.0 mm Mast Ø: 80.0 mm Wei...

Ronstan stainless steel Vee jam cleat. Max Rope Ø: 6 mm Length: 70.0 mm Width: 19mm fastener Spacing: 50mm Weight: 20 g

Low profile stand-up kit allows 0° or 90° alignment. Fits Ronstan Series 40 Orbit Blocks. Stand-up kits feature a clatter-free rubber boot. You c...

Low profile stand-up kit allows 0° or 90° alignment. Fits Ronstan Series 55 Orbit Blocks. Stand-up kits feature a clatter-free rubber boot. You c...

Ronstan stainless steel Stay Adjusters. Applications •Typically used on dinghies, catamarans and small keelboats Materials •Grade 316 stainless ...

Ronstan Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications •For wire end termination...

Ronstan Threaded swage terminals (2.5-26mm wire) have rolled right hand UNF threads for greater strength. Applications •For wire end termination...

Ronstan 180 degree swivel base and cleat. Attach to mast or boom for direct adjustment and cleating of control lines. Sheave can be re-located to f...

Ronstan Telltales. Essential guide for proper sail trim. Adhesive patches to ensure permanent bond with sail. High resolution fabric tails for maxi...

Ronstan Urethane tiller extension universal joint. Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The ...

Ronstan stainless steel tiller extension with bolt through attachment. Clevis pin makes removing tiller extension easy. Suits 16mm (5/8") diamet...

Ronstan stainless steel tiller extension with screw on attachment. Clevis pin makes removing tiller extension easy. Suits 16mm (5/8") diameter t...

Ronstan stainless steel dinghy transom gudgeon. SPECIFICATIONS: Base Width: 52mm Base Height: 30mm Hole Ø: 6.4 mm Weight: 33 g

Ronstan stainless steel dinghy transom pintle. SPECIFICATIONS: Base Width: 52mm Base Height: 30mm Pin Ø: 6.4 mm Weight: 43 g

Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when...

Top rudder gudgeon, 3-hole mounting with larger 10mm carbon bush. Ideal for larger dinghies with high rudder loads. Sea sure rudder fittings are p...

Riley Heavy Duty Transom Rudder Pintle. Stainless Steel. Hole Type: Plain Lug Spacing: 26mm Material Thickness: 2.5mm - 12 Gauge Mounting Hole ...

Riley Heavy Duty Transom Rudder Pintle. Stainless Steel. Hole Type: Plain Lug Spacing: 26mm Material Thickness: 2.5mm - 12 Gauge Mounting Hole ...

Locking gate for dinghy rudder systems. Holds rudder down into pintles when sailing, Push in to remove rudder. Length: 57mm Width: 28mm Protrusio...

PNP Heavy Duty Nylon sail slide with stainless steel reinforcement. Fits 7/8" (22mm) flat mast track. •Suitable for Keelboat and Trailerable yacht...

Brass external sail slides to fit brass internal 16mm or 20mm tracks. Slide Length 24mm. Comes with round thimble for lashing to sail.

Teflon impregnated plastic sail slugs. Available to suit various sizes of round mast track.

Strong Stainless Steel sail slugs to fit round 3/8" 10mm mast tracks.

SAILTECK Sail to Win. Race Compass Robust and waterproof Sailteck uses proven sealing techniques to guarantee water integrity to 20m submersion an...

SAILTECK Sail to Win.  Mast bracket for SK01 race compass unit. Rugged design Multiple fixing options: strap, slug, bungee UV Stable Included in ...