Products

Aids rope alignment. Tapered pad for CL201, CL219, CL219AN CL237 and CL238.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

Aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN.

Aids rope alignment. Tapered pad for CL205, CL220, CL239 and CL240.

Aids rope alignment. Tapered pad for CL209, CL254 and CL254AN.

Tapered Pad allows correct rope/cleating alignment. Can be mounted either way round. Backplate provides under deck support when bolting through thi...

The cleat has an in-built pulley that offers a compact solution , for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock, that is ea...

With the CL201 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is maufactured from UV res...

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL201 and CL219. ROPE SIZE: 6-12MM BASE D...

The smallest open nylon cleat. Black or White are standard. Other colours available to order. Use for control lines on dinghies and kayaks. The whi...

CL825CKC allows users to add an extra cleat without drilling more holes. Just remove the CL211 Mk1 and fit the twin CL825CKC in its place. The hole...

Nylon Jamb Cleat, Up To 6mm Rope Glass Reinforced Nylon Jamb Cleat With Fairlead Length Overall: 84mm Hole Spacing: 67mm WT: 15g

Manufactured by Holland Yacht Equipment b.v (HYE) under a GL (Germanischer Lloyd) certificate these blocks are extensively tested and can be found ...

Riley Stainless Steel Vee jammer with fairlead. Suitable for rope sizes 4-6mm. DIMENSIONS: Length: 68mm Width: 19mm

Kit to rebuild Harken standard cam cleats #150 from 1993 and newer. Kits include: cam caps, washers, Delrin® balls, torsion springs, baseplate, cam...

Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wi...

Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized fo...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting...

Harken 150 Alloy Cam-Matic® with bullseye keeps line fair. Mounts on stainless steel base. Height (mm) 33 mm Height (in) 1 5/16 in Weight (g) 113 g...

Harken 365 Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base. Comes with Harken 365 Carbo Cam Cleat Height (mm) 33 mm Height...

The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90° to the cleat. This sets it apart from other fairleads where line unc...

The 438 adapter plate is perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control. Fits Harke...

Wedge kits improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Length (mm) 65 mm Width ...